Go Back   Alberta Outdoorsmen Forum > Main Category > Buy and Sell > RV's & Trailers For Sale

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 03-27-2018, 09:56 AM
700 700 is offline
 
Join Date: Aug 2010
Posts: 120
Default Dicor 1 gal. EPDM Rubber Roof System Water-Based Adhesive

For sale $75.00
Calgary nw

Water-based acrylic adhesive is environmentally friendly and user safe. Special formula gives you more open time for installation, and many re-tack opportunities. Provides excellent coverage and is easy to apply. Use on moisture absorbent substrates, NOT on metal, fiberglass or membrane to membrane applications.

The water based bonding agent is part of Dicorís three-part roofing system that includes the roofing membrane, bonding adhesive and lap sealant.

Dicor has secured the best combination of products to make installation of a new roof covering as easy and reliable as possible, thereby enhancing RV enjoyment. Each component in the kit is formulated, tested and proven in the field to create an excellent bond. By using this Water Based Bonding Adhesive as part of the installation system -- according to the instructions provided -- for Dicor EDPM and TPO installation, Dicor will warrant that aftermarket product for 12 years.

This product is NOT intended for seaming rubber to rubber or adhering rubber to metal, fiberglass or plastic surfaces.

User determines suitability for intended use and assumes all risk and liability.

Contains no hazardous ingredients per OSHA 1910.1200.

This material is to be used on porous substrates only. Stir thoroughly before use and keep covered when not in use.

Surface Preparation: Clean, dry surfaces are required for optimum bond strength.

Application Methods: Apply adhesive evenly at a rate of one gallon for every 160-180 square feet to thte substance by short nap roller.

Open Time: EPDM Rubber and TPO membranes should be immediately rolled onto the adhesive. No waiting time is necessary. Care should be taken to minimize the air trapped between substrates.

Bonding: Mate the surfacs with only enough pressur, evenly applied, to insure good contact between the substrates. Excessive pressure can redistribute the adhesive in an uneven manner.
Attached Images
File Type: jpg DICOR 901BA.jpg (33.5 KB, 21 views)
Reply With Quote
  #2  
Old 05-06-2018, 10:59 AM
700 700 is offline
 
Join Date: Aug 2010
Posts: 120
Default ttt

ttt
Reply With Quote
  #3  
Old 06-02-2018, 07:51 PM
700 700 is offline
 
Join Date: Aug 2010
Posts: 120
Default ttt

ttt
Reply With Quote
  #4  
Old 07-11-2018, 08:08 AM
700 700 is offline
 
Join Date: Aug 2010
Posts: 120
Default ttt

ttt
Reply With Quote
  #5  
Old 08-13-2018, 07:23 AM
700 700 is offline
 
Join Date: Aug 2010
Posts: 120
Default Btt

Btt
Reply With Quote
  #6  
Old 11-12-2018, 08:31 PM
700 700 is offline
 
Join Date: Aug 2010
Posts: 120
Default btt

btt
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 04:18 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.