Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #181  
Old 04-01-2016, 09:21 PM
Brad Donovan Brad Donovan is offline
 
Join Date: Sep 2013
Posts: 105
Default Lee Loaders

Quote:
Originally Posted by Marko View Post
Am I misunderstanding this?^^^ Were you using a mallet to pound live primers into the primer pocket??

Mark
Thats how the classic Lee Loader works. I have one for .303.
Reply With Quote
  #182  
Old 04-06-2016, 09:53 PM
Mangosteen Mangosteen is offline
Banned
 
Join Date: Feb 2015
Location: In the Orchard or Punta Sal Peru
Posts: 1,027
Default Lee

Wrong Thread
Reply With Quote
  #183  
Old 11-30-2016, 07:49 AM
The Flint&Fly Guy's Avatar
The Flint&Fly Guy The Flint&Fly Guy is offline
 
Join Date: Mar 2015
Location: Slave Lake AB
Posts: 628
Default

Well, into reloading for less than a year and my first mistake. Loaded 47gr of h-4350 instead of 57 and it cost me a fine buck this year!
Reply With Quote
  #184  
Old 12-20-2016, 10:29 PM
hoobedoo hoobedoo is offline
 
Join Date: Oct 2014
Posts: 3
Default

Just started reloading last year and man do I like it and the results you get from getting your rounds perfect.
I had a brass break on me this year in the press. It really sucked cause it was the last piece I had to resize that night.
It was my buddies dies and so I needed to fix it right??
Wrong
I tried and could not get the brass out for the life of me so then I started drilling ever so carefully into the die. I made it work for a while and got most of the brass out. I then used a drill hit a bit to big and man do I screw the die over.

Moral of the story when a brass gets stuck In the die just put it down and send it into get it fixed!


Sent from my iPhone using Tapatalk
Reply With Quote
  #185  
Old 01-05-2017, 08:26 PM
Tucker1717 Tucker1717 is offline
 
Join Date: Jan 2016
Posts: 16
Default

Quote:
Originally Posted by KegRiver View Post
I've been lucky I guess, no mistakes yet.
Then too I don't shoot a lot. Maybe 40 or 50 centerfire a year.

I do shoot two or three bricks of 22 and a box or two of 22 mag, but of course I don't reload them.

The worst I've had happen is, I've had a few .303 cases separate on firing.
I loose track of how many times some cases have been reloaded and then I get one that leaves half the case in the chamber.
So far not a big deal to remove, but it makes me uncomfortable thinking about what could happen.

for sure man!
Reply With Quote
  #186  
Old 01-05-2017, 08:26 PM
Tucker1717 Tucker1717 is offline
 
Join Date: Jan 2016
Posts: 16
Default

Quote:
Originally Posted by Mangosteen View Post
Wrong Thread

wrong tread
Reply With Quote
  #187  
Old 04-14-2017, 11:01 AM
KevGuy's Avatar
KevGuy KevGuy is offline
 
Join Date: Apr 2013
Posts: 423
Default Mixed H-1000 with Retumbo

I pulled the bullets on 25 rounds for my 7mm STW. The powder was Retumbo. As I pulled each bullet, I dumped the powder into an empty H-1000 bottle. After bullet pulling was done I noticed that some powder had been spilled while pulling the bullets and I probably didn't have enough powder to reload all 25 rounds again. As I wanted to reload these rounds with H-1000, I opened up a new bottle of H-1000 and dumped a few scoops into the H-1000 bottle with the Retumbo in it to make sure I could reload all 25 rounds again with my planned H-1000 charge.

At this point I still had not realized that I had just mixed H-1000 with Retumbo. I begin my reloading process and filled the hopper of my powder measure with the Retumbo/H-1000 powder mixture. I'm doing my charges into each case when about 10 rounds in I decided to seat some bullets. I look at the MTM ammo box the rounds were in reading the label inside stating the OAL I need to set my die up for. Suddenly I noticed the powder saying "Retumbo." It then hits me that I had dumped H-1000 in with Retumbo.

After banging my head on the wall for a few minutes for making such a stupid error, I dumped all the H-1000/Retumbo mixture back into the empty H-1000 bottle walked into the bathroom with it, poured the powder into the toilet and FLUSH!

I will admit, it was late in the evening when I was doing this and I was rushing to prepare these rounds for the next day. It was my own fault and I was lucky to have caught the error in time.

Last edited by KevGuy; 04-14-2017 at 11:13 AM.
Reply With Quote
  #188  
Old 06-13-2017, 02:47 PM
rwalker rwalker is offline
 
Join Date: Feb 2017
Posts: 21
Default

I had some 223 I had no more use for so I foolishly decided to use it up in my ar15. The first round shot and the next was jammed so tightly in the chamber I could not remove it. I had high pressure rounds in the bolt action... And not a good combination for the Ar15. Pretty stupid of me

Sent from my SM-G935W8 using Tapatalk
Reply With Quote
  #189  
Old 06-14-2017, 11:36 AM
rwalker rwalker is offline
 
Join Date: Feb 2017
Posts: 21
Default Percussion

I have one of my fathers from many many years ago. He acquired a 1851 navy colt and decided to try it in his basement using cast wax bullets with a reduced charge into a cardboard box. Each time he loaded a cylinder he brushed off the excess black powder into his ashtray.

And yes, you guessed it, he had a nasty surprise once he was done and lit up a cigarette and placed it in the ashtray....
Reply With Quote
  #190  
Old 08-27-2017, 01:27 PM
flipkrak flipkrak is offline
 
Join Date: Jan 2017
Posts: 9
Default

This guy told me does good reloads and traded 200rounds of his 9mm reloads with a stock I have laying around. Got home and check the rounds and you by that instant that they were all wrong. Brass were not polished and measurements were not right. He didn't bother resizing them and never placed them in a tumbler for cleaning and polishing.


Sent from my iPhone using Tapatalk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:49 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.