Tika T3 x what rings and bases ?

[mathews z7]

Hello I have a new Tika T 3 x and are the Sako opti locks rings and bases the best to use on this gun ? Thoughts please


Sent from my iPhone using Tapatalk

[waterhaulerhunter]

I’ve always used Talley lightweights on tikka rifled. Lows will work up to 40mm obj and medium will be from that up. Optiloks areto expensive in my opinion.

[mathews z7]

Yes they are that crazy expensive that’s why I was wondering what else was out there , I don’t mind spending the money if it’s worth it . Thanks for the info


Sent from my iPhone using Tapatalk

[Dubious]

Tally light weight mediums and have them lapped

[MooseRiverTrapper]

Talleys

[marxman]

Talleys go in the tapped holes on top of the receiver they are nice. I also have warne made for the grooved receiver rail it’s a great system and you can set the rear ring where you want along the rail.you can get other rings for the tikka rail but I have not used them. I dislike opti locks I have tried on my Sako.

[Scottmisfits]

I have the Leupold rings and bases on my Kimber, just to keep everything as light as possible. On every other rifle I have, I use rails. Get the rail for your rifle and then use whatever rings you want. I like the Burris Zee rings on most of mine.

[Big Sky]

Burris xtb bases.
Burris Zee, or better yet, Burris Signature Zee rings.

[Chewbacca]

I put Talley Lows with a Vortex 4x15x50 on mine. There is just enough room for the lens caps that came with it. Keeps your head low for a good check weld.

[Wrongside]

It depends a bit on the scope you have in mind and your uses for the rig, but I prefer rails on most of my rifles these days. It's hard to pass up on the sturdy, effortless mounting and ease of moving scopes around. For a Tikka, the Mountain Tactical or Area 419 rails offer great design features. Mount the rail properly, add a quality ring and you're not likely to have any mount related problems at all.

If I were to go with light, direct mount rings for a Tikka, the Sportsmatch would be my first choice. Seen a few Talley LWs crack and can't be bothered anymore.

[markg]

I always put picatiny rails on my Tikka's It is my prefered method of mounting. You can then choose any rings you want.