...Basically the same..On a five pin the 40 yd pin middle of sight ..
On six between 40 and 50YD pins middle of sight...7 pin the 50 would be middle...then shoot your longest pin and make sure you have room and pins are not to low...than site in 20..then 30...pending on bow speed and poundage the other pins can be moved to a close guess-ti-mate by adjusting remainder of pins close to same gap between the 20 and 30 pin..
The lower the speed and poundage that gap will slightly increase with the more pins you have...between each
JMHO
Neil