Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #571  
Old 11-22-2021, 09:01 PM
32-40win 32-40win is offline
 
Join Date: Oct 2010
Location: Near Drumheller
Posts: 6,733
Default

Popped the butt pad off a T3X to see what is what to install QD sling swivel sockets, looks fairly straightforward, lots of room on the forend. I would have finished it today, but, need to go to town to get some steel bed epoxy. Mine dried up, hard like rock.
Considered loading some 6.5cm with Accubonds.
Had plans to go shoot this AM, wind kiboshed that.
Ordered a Forster 3way cutter head for 6.5.
__________________
You should also be a member;
CCFR
CSSA
Reply With Quote
  #572  
Old 11-24-2021, 07:40 PM
Smokinyotes Smokinyotes is offline
 
Join Date: Jan 2013
Location: onoway, Ab
Posts: 6,956
Default

The 50 original brass I bought for my 257 wby have been fired 4x and only ever neck sized. It was time the shoulder was pushed back so did a full length resize. Gawd I hate trimming, chamfering and deburring brass.
Reply With Quote
  #573  
Old 11-25-2021, 10:47 PM
Mohawklax8 Mohawklax8 is offline
 
Join Date: Nov 2021
Posts: 21
Default

Load as much rounds as I can
Reply With Quote
  #574  
Old 11-26-2021, 10:09 PM
6.5 shooter's Avatar
6.5 shooter 6.5 shooter is offline
 
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,205
Default

Repaired a pair of Kelby rings which had torn out cap screw holes from being over torqued. A good day, saved a couple hundred bucks and have a like new set of rings for cheap !
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
Reply With Quote
  #575  
Old 11-27-2021, 06:46 PM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 961
Default

I found 6 pristine 45-70 cases at the range today. De-capped them…., tumbled, dried, sized, flared, primed, charged, seated, and crimped.
Reply With Quote
  #576  
Old 11-28-2021, 12:26 PM
schreyer's Avatar
schreyer schreyer is offline
 
Join Date: Sep 2011
Location: Sherwood Park, Alberta
Posts: 489
Default

Neck sized, deprimed, and tumbled another hundred cases of 300 win mag. Few hundred more to go…
__________________
My mom says I'm a keeper.
Reply With Quote
  #577  
Old 11-28-2021, 12:44 PM
brewster29 brewster29 is offline
 
Join Date: Dec 2011
Location: East Kootenays, BC
Posts: 1,159
Default

Over the last two days I have performed WipeOut cleaning of 4 rifles. One in particular took three batches of cleaner, a Douglas premium barrel that only ever saw Noslers. The two rifles that live on a Barnes diet both cleaned up very easily, with almost no blue seen on the patches. Weird and not what I expected.

Last edited by brewster29; 11-28-2021 at 12:50 PM.
Reply With Quote
  #578  
Old 12-01-2021, 06:23 PM
Dmay Dmay is offline
 
Join Date: Feb 2008
Location: Elk Point, Alberta
Posts: 924
Default

Made some of these:

[IMG][/IMG]

Using this stuff:

[IMG][/IMG]

[IMG][/IMG]

In this thing:

[IMG][/IMG]

To feed this guy:

[IMG][/IMG]
Reply With Quote
  #579  
Old 12-01-2021, 07:18 PM
obsessed1 obsessed1 is online now
 
Join Date: Jan 2013
Posts: 2,919
Default

Paper patched up a batch of cast bullets for the 30-30. Ready to reload. Sized out a bunch of 45-70 brass ready to prime and throw powder..
Reply With Quote
  #580  
Old 12-01-2021, 07:38 PM
JBE JBE is online now
 
Join Date: Sep 2008
Posts: 727
Default

I have been working on a Wildcat stock for my sons winchester 70. A bit more work than I anticipated but it is coming along.
Reply With Quote
  #581  
Old 12-01-2021, 08:58 PM
marky_mark marky_mark is offline
Banned
 
Join Date: Mar 2009
Posts: 5,701
Default

Dmay
Was that the 470 ne that was at prophet river?
Reply With Quote
  #582  
Old 12-02-2021, 09:55 AM
32-40win 32-40win is offline
 
Join Date: Oct 2010
Location: Near Drumheller
Posts: 6,733
Default

Working on researching a source for RWS 30cal 184gr Evo bullets for the 30R Blaser today. My Krieghoff SXS was definitely regulated with those in a factory RWS round. Apparently they do offer them as a reloading component, have to see what it'll take to acquire them. From what I did with it at 200yds, I'd expect to get a decent 300yd composite group out of it with those, and that would be sweet with that gun. I will likely hate the price, but, that is life, with playing with this kind of gun.
__________________
You should also be a member;
CCFR
CSSA
Reply With Quote
  #583  
Old 12-02-2021, 10:20 AM
Dmay Dmay is offline
 
Join Date: Feb 2008
Location: Elk Point, Alberta
Posts: 924
Default

Quote:
Originally Posted by marky_mark View Post
Dmay
Was that the 470 ne that was at prophet river?


Nope, I got it at Wolverine Supplies in 2016.
Reply With Quote
  #584  
Old 12-02-2021, 05:51 PM
marky_mark marky_mark is offline
Banned
 
Join Date: Mar 2009
Posts: 5,701
Default

Quote:
Originally Posted by Dmay View Post
Nope, I got it at Wolverine Supplies in 2016.
They had one listed there recently also
How do you like it?
I’m assuming it’s a krieghoff?
Reply With Quote
  #585  
Old 12-03-2021, 11:10 AM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 961
Default

Quote:
Originally Posted by Dmay View Post
Nope, I got it at Wolverine Supplies in 2016.
That looks awesome Darrell!
Reply With Quote
  #586  
Old 12-03-2021, 11:11 AM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 961
Default

I had the week off, so I’ve been doing a lot of loading. Today…it’s.357mag with 125gr Campro bullets and a new powder for this caliber for me.



I have completely gone away from H110. It’s now TiteGroup. This combo is charged with 7.0gr.



So I have 300 rolled up now with the new choice of powder.
Reply With Quote
  #587  
Old 12-04-2021, 01:51 PM
huntinstuff's Avatar
huntinstuff huntinstuff is offline
 
Join Date: Sep 2008
Location: Edmonton Alberta
Posts: 9,586
Default

Decap and FL resized 400 300win mag brass....

I also have trimming to do
__________________
When you are born, you get a ticket to the Freak Show.
If you are born in Canada, you get a front row seat.
Reply With Quote
  #588  
Old 12-04-2021, 04:54 PM
KegRiver's Avatar
KegRiver KegRiver is offline
Gone Hunting
 
Join Date: Sep 2010
Location: North of Peace River
Posts: 11,346
Default

I've been working on brass for a few rifles.

It started with working up a load for my brother's 6mm.

Then, since I had the equipment fired up already I decided to process some brass I bought off Skidderman a couple of years ago.

So out came the 30-30 and 30-06 brass. Then my sister in North Star called, she had a fresh beef liver for me if I wanted it. Which of course I did.

During the visit that followed she went looking for a user manual for something she wanted me to fix, (I forgot what that was) and in one package she opened was a hand full of 30-378 Wby empties and misfired cartridges.
Only a shallow indent in the primer, not enough to set them off. And they were filthy. So I offered to clean them.

That lead me to researching the 30-378 as I had never heard of it before.
Interesting cartridge. More a canon without wheels than a sporting cartridge but very interesting non the less.

So now I'm on my last batch of 30-30 brass. All the 6mm and 30-30 brass is ready for primers and loading, but I am out of primers.

So, next step, a trip to Peace River for supplies. I may have to order online, Peace River only as a CT store that handles reloading supplies but I prefer to buy locally when possible so I'll make the trip and see what I can find.

For those who wonder shy I wouldn't call ahead, I've tried that a few times in the past only to find out that the clerk I talked to had no idea what they had in stock. So it's just a lot easier and effective to go and make it a multi task trip.

We need eggs and I hear my sister in Weberville is overstocked, plus they just butchered three steers and she has a 50 lb bag of real suet she kept for me from the slaughtering.

So that's what I've been doing on my bench. Oh, that and putting together a few hundred more camera mounts.
__________________
Democracy substitutes election by the incompetent many for appointment by the corrupt few.

George Bernard Shaw
Reply With Quote
  #589  
Old 12-04-2021, 05:05 PM
obsessed1 obsessed1 is online now
 
Join Date: Jan 2013
Posts: 2,919
Default

Loaded up a bunch more 30-30s this morning.
Reply With Quote
  #590  
Old 12-05-2021, 12:37 PM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 961
Default



.308win
45.0gr D4064ssc
BR2 CCI
Lapua brass
185gr Berger Juggernaught

k
Reply With Quote
  #591  
Old 12-05-2021, 03:48 PM
Dmay Dmay is offline
 
Join Date: Feb 2008
Location: Elk Point, Alberta
Posts: 924
Default

Quote:
Originally Posted by marky_mark View Post
They had one listed there recently also
How do you like it?
I’m assuming it’s a krieghoff?

Actually, no, it's a Merkel 140 AE Safari Arabesque.
I like it alot. Don't really have any use for it, but it keeps my shoulder a nice shade of purple.
Reply With Quote
  #592  
Old 12-05-2021, 04:32 PM
marky_mark marky_mark is offline
Banned
 
Join Date: Mar 2009
Posts: 5,701
Default

Quote:
Originally Posted by Dmay View Post
Actually, no, it's a Merkel 140 AE Safari Arabesque.
I like it alot. Don't really have any use for it, but it keeps my shoulder a nice shade of purple.
It’s a beautiful rifle
Reply With Quote
  #593  
Old 12-08-2021, 11:11 AM
W921 W921 is online now
 
Join Date: Dec 2019
Posts: 1,304
Default

I'm to crippled up really for big game hunting anymore so I'm thinking my 300 mag would be more useful to me if I load it down. The reason is so I can spend more time shooting it at the range without getting sore.
I have a lot of really old reloading manual's. I think they are way better than the newer ones not only because they were using the guns and powders that I'm using but there is just more useful stuff in them.
Examples would be moderate reduced loads,gallery reduced loads and these are for jacketed,cast or even plastic bullets. How to develop them. How to reload without much for reloading gear,etc.
Anyway I'm using up sr 4759 in my 300 mag with jacketed 150s going about 1800 fps. No recoil and good accuracy at 100 yards which is all I need for off hand target shooting.
My next project will probably involve my 444 marlin although its newer cartridge than most of my manuals.
Reply With Quote
  #594  
Old 12-08-2021, 11:21 AM
elkhunter11 elkhunter11 is online now
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,834
Default

Now that hunting season is done, I am back to loading my 28 gauge and 410 hulls for skeet. I have been doing 500 per session, and have 5000 done, with about 2500 left to go, so I should finish sometime next week.
__________________
Only accurate guns are interesting.
Reply With Quote
  #595  
Old 12-11-2021, 11:14 AM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 961
Default

Damn! I am officially bored. I have no more to load. Zero! This not being able to shoot anything until sometime in January is getting to me.



So I loaded the last of anything I have to load this morning. I found 80 cases of 6.5CM that I had de-capped and cleaned. It turned out that 5 of them had loose primer pockets. So I discarded those. But who says you can’t load for precision and repeatability with multiple head stamped brass cases? These are of 4 different head stamps. Various adjustments on the annealer, dies, and seating gives me a batch as good as the match grade Lapua cased rounds. My variation for all processes remains at +/-.0005”.

Another batch of 75 rounds for fouling and plinking.



Reply With Quote
  #596  
Old 12-14-2021, 08:10 AM
elkhunter11 elkhunter11 is online now
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,834
Default

Finished loading skeet loads for 2022, 2800+ loads for the 410, and 4000+ loads fr the 28 gauge, enough for a normal year of skeet. The scary part is that my components are almost gone, and I have to buy more for next year.
__________________
Only accurate guns are interesting.
Reply With Quote
  #597  
Old 12-14-2021, 12:49 PM
catnthehat's Avatar
catnthehat catnthehat is online now
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,527
Default

Rearranging stuff, purging random cases and redundant powders and generally cleaning up before I start doing some barrel swaps
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #598  
Old 12-14-2021, 01:44 PM
Big Sky's Avatar
Big Sky Big Sky is offline
 
Join Date: Feb 2012
Posts: 2,295
Default

As everyone knows, reloading components can be difficult to source.

Found some powder that I've never used before for heavy bullets in 223.
Results are satisfactory so I'll load up a bunch to use until I can get my hands on some of my usual powder.

So this afternoon I'll be putting together 200 rounds of 223Rem topped with 75gr Horn BTHP.
Reply With Quote
  #599  
Old 12-29-2021, 04:38 PM
gunluvr's Avatar
gunluvr gunluvr is offline
 
Join Date: Sep 2012
Posts: 1,594
Default New bench

I https://drive.google.com/file/d/1W8U...w?usp=drivesdk
https://drive.google.com/file/d/1WIz...w?usp=drivesdk
https://drive.google.com/file/d/1WEx...w?usp=drivesdk
https://drive.google.com/file/d/1WDP...w?usp=drivesdk
https://drive.google.com/file/d/1WDh...w?usp=drivesdk

Recently rebuilt my loading bench etc. Legs/frame treated 4x4/ 2x4, top is 3/4" fir laminated w/ 1/2" birch, shelves are oak plywood. Here's a few pix. I'll try to post some more later.
__________________
Some days you're a bullet; some days you're a gopher.
Reply With Quote
  #600  
Old 12-29-2021, 04:48 PM
Northwinds Northwinds is offline
 
Join Date: Jan 2013
Posts: 425
Default

found out today that it is indeed possible to load a entire 8lb keg of green dot in one day on a Spolar loader. I was loading 19.5 grains of green dot with 1 1/8 oz of #8 homemade shot and windjammer wads.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:52 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.