|
10-11-2021, 07:57 PM
|
|
|
|
Join Date: May 2007
Location: Edmonton
Posts: 1,714
|
|
New reloading tool
Well This weekend I made several stupid mistakes reloading with resulted in needing to remove the bullet from loaded rounds. In the past I used kinetic bullet pullers and always hated them. I needed to pull 20 bullets and I decided to try the RCBS bullet puller with caliber specific collet. Wow! what a dream to use.
Easy to use and no damage to the tip of the bullet.
Should have bought this a long time ago.
|
10-11-2021, 07:59 PM
|
|
|
|
Join Date: Feb 2012
Location: Blackfalds
Posts: 6,945
|
|
Yup I love mine.
When doing load development, I often load past book values so I can see when I hit pressure signs in my rifle. Chronograph as well.
I don’t have to worry about not making it to the top, I just simply pull the bullets with the collet, pour the powder out, neck size and reload again.
__________________
Trudeau and Biden sit to pee
|
10-11-2021, 08:00 PM
|
|
|
Join Date: Oct 2010
Location: Mississauga
Posts: 73
|
|
Indeed. Great tool. No dammage to bullet. Can salvage or reuse everything. Can pull 20 rounds in a few minutes.
-Reza
__________________
- RenegadeG2
Cherish the outdoors !
|
10-12-2021, 10:52 AM
|
|
|
|
Join Date: Sep 2012
Posts: 1,597
|
|
I'm going to add a cheap press to my bench, maybe a Lee classic, just for a bullet puller.
__________________
Some days you're a bullet; some days you're a gopher.
|
10-12-2021, 11:13 AM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,574
|
|
The RCBS collet puller has been my goto for over 40 years
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
10-12-2021, 11:38 AM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,043
|
|
I used the RCBS for a long time but have now switched to the Hornady collet puller. Far slicker to use, no damage to bullets and works on turret presses a lot better becasue you don't need to be able to twist the T handle tight.
|
10-12-2021, 11:39 AM
|
|
|
|
Join Date: Dec 2012
Posts: 1,650
|
|
I have been using one for a few years ( not as old, I mean experienced as Cat ) and they do work great. Using a Kinetic puller never made sense to me...
__________________
There is no God higher than truth - Gandhi
Protect the oppressed even if an enemy, never forgive the traitor especially if he is your friend
|
10-12-2021, 12:05 PM
|
|
|
|
Join Date: May 2014
Location: SJ, NB
Posts: 410
|
|
Quote:
Originally Posted by Dean2
I used the RCBS for a long time but have now switched to the Hornady collet puller. Far slicker to use, no damage to bullets and works on turret presses a lot better becasue you don't need to be able to twist the T handle tight.
|
I've used both the RCBS and Hornady collet pullers. The Hornady is the better tool by far.
__________________
"The majority is never right."
|
10-12-2021, 10:52 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,237
|
|
RCBS because it is what I have. Seem to do the job very well and no damage to the bullet. Used a hammer style for years, they are JUNK. Spend the money once, buy the Hornady or the RCBS and don't look back.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
10-13-2021, 12:08 AM
|
|
|
Join Date: May 2007
Location: On the other side of the mountain
Posts: 478
|
|
I had a collet puller at one time. Sold the entire reloading bench, puller went with it.
Several years later, decided to get back to reloading. Didn't want to spend the money on a collet puller and went to the inertia puller. To prevent bullet damage, I installed a chunk of high density foam in it to absorb the impact and have yet to damage a retrieved bullet.
__________________
Lest we forget
Humbolt Broncos Tragedy
" I'm trying to not get cynical about what is a totally devastating tragedy but the maleness, the youthfullness and the whiteness of the victims are playing a significant role."
Nora Loreto 6:49 PM 8 Apr. 2018
|
10-13-2021, 05:22 AM
|
|
|
Join Date: Feb 2013
Location: Edmonton/San Tan Valley,Arizona
Posts: 798
|
|
Same here, I had a kinetic puller years back and have since moved to the RCBS collet puller. Don't use it much thankfully but it's sure nice to have when you need it. Either the RCBS or Hornady is head and tails above the kinetic bullet puller.
|
10-13-2021, 06:36 AM
|
|
|
Join Date: Nov 2018
Posts: 144
|
|
have both kenetic and collet pullers kenetic works if only one goof up but if several then the collet puller is the way to go I really like my rcbs but I only load on a single stage press
|
10-14-2021, 12:03 AM
|
|
|
|
Join Date: May 2007
Location: Fort Sask, AB
Posts: 4,918
|
|
I should get this tool.
I just pulled 20 today with the inertia hammer, 7mm and 168 VLDs, 70g of retumbo.
I’ll likely reload these with 162g ELDX, and drop the retumbo to 69g.
And when pulling, found one mistake, #12 of my 20 had no powder in it, check check next time.
TBark
|
10-14-2021, 04:15 PM
|
|
|
|
Join Date: May 2009
Location: Alberta Territory
Posts: 629
|
|
I have the RCBS and a Kinetic pullet they both are great in the right places. Cast bullets I prefer my Kinetic pullet for Jacketed bullets it's the RCBS Collet puller hands down.
__________________
Ken.
Love to Live, Live to Shoot
Live by the Gun...Die by the Gun...
|
10-14-2021, 04:49 PM
|
|
|
Join Date: Jan 2013
Posts: 2,930
|
|
Quote:
Originally Posted by TBark
I should get this tool.
I just pulled 20 today with the inertia hammer, 7mm and 168 VLDs, 70g of retumbo.
I’ll likely reload these with 162g ELDX, and drop the retumbo to 69g.
And when pulling, found one mistake, #12 of my 20 had no powder in it, check check next time.
TBark
|
Check, check, check....and review your practice to make certain these "mistakes" cant happen again.. in my system I throw/ weigh powder, drop into case and seat bullet right away. Then start the next round
OP I have the RCBS puller as well. Don't think I've pulled out my hammer puller since....great peice of kit for sure
Last edited by obsessed1; 10-14-2021 at 05:10 PM.
|
10-14-2021, 04:55 PM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,043
|
|
There is no right or wrong system but there are things that will definitely reduce the chances of errors. Doing one step on all brass at the same time dramatically reduces error. If you study lean process and six sigma that is a fundamental building block. Deprime and size. Clean then prime all cases. Weigh and charge. Use a flashlight to check the charge on all cases. Seat bullets. If you are using a progressive press the process is different. Single stage press loading I highly recommend batching the steps.
|
10-16-2021, 04:53 AM
|
|
|
|
Join Date: May 2014
Location: SJ, NB
Posts: 410
|
|
Quote:
Originally Posted by TBark
And when pulling, found one mistake, #12 of my 20 had no powder in it, check check next time.
|
Wow, that's a big mistake. Better to review your steps and find a better routine in the future. I'm pretty sure a fired primer w/o powder would lodge a bullet in your throat which would end a hunt with that rifle.
__________________
"The majority is never right."
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 08:55 PM.
|