Update on the fiberglass 4wt build

Flieguy · #1 01-19-2015, 09:30 PM

On closer inspection, the angler's roost blank does have a few blemishes, particularly around the ferrules, which I hope are not weak spots.... Middle section is on the drying motor as I type this and I'm pretty happy with how the epoxying is going. Opted for a white thread which turns transparent when epoxied, and it's looking pretty cool. Also has black trim on the ferrule wraps. I'm excited to take this thing out and fish it.

pics to come.

Flieguy · #2 01-19-2015, 09:46 PM

This ain't your daddy's fiberglass, second coat of epoxy to come soon.

comments and constructive criticism welcome, this is only my third rod.

jeprli · #3 01-19-2015, 11:46 PM

Cool looking stick you got going. Nice tight wraps, clean.

Handle looks like a remote control on picture

not my style, but nice to see something different. How does it feel compared to cork?

You could work a bit on transition from thread to blank. If you leave it like this it might start peeling from uneven epoxy contact with blank.

Flieguy · #4 01-20-2015, 09:42 AM

Thanks! Yeah my epoxy is my weak point as far as building skills go...

The carbon fiber is smooth and light and feels nice in the hand to me, however it doesn't really flex at all with the blank

Heron · #5 01-20-2015, 05:04 PM

I am no expert and had a similar result going for the clear wraps. I used white silk and I can see faint thread below the epoxy. That was years ago. I have a build this winter and want to try the clear wraps again. I have read that thinning the epoxy with a little with acetone works. Other tips are welcome.

Not a huge fan of the shinny grip either but nice looking wraps.

flint guy · #6 01-21-2015, 09:29 PM

That handle is weird in a good way. Youll be easy to spot on the water! I find this facinating. If you get the chance please keep posting pics, especially of the work in progress, I really apreciate a craftsman at work.

Bhflyfisher · #7 01-21-2015, 09:43 PM

Neat toy.

I Keep saying im going to buy my sage blanks and starting rolling my own rods. Never find the time.

Flieguy · #8 01-21-2015, 10:57 PM

you think you'll save money, but it's a lie you tell yourself. Rods will multiply in your closet

I haven't built on any sage or loomis or st croix blanks, there are companies which only make blanks and they're a lot cheaper, but still good quality. MHX, Batson, lamiglas....

still have to build a pieroway someday, and I might build a sage for the salt if I go to Belize

jeprli · #9 01-22-2015, 08:51 AM

More you build, more you save

So far I've spent about $1000 on building supplies including blanks. If I was to purchase finished rods, it would total closer to 2000$. Not including time, it is worthwhile if you're in it for a long run.

Most blank manufacturers give great warranty, choices of components are endless, $ for $ you can build a far superior rod than what is offered at retail stores.

Flieguy · #10 01-22-2015, 10:14 AM

Quote:

Originally Posted by jeprli

More you build, more you save

So far I've spent about $1000 on building supplies including blanks. If I was to purchase finished rods, it would total closer to 2000$. Not including time, it is worthwhile if you're in it for a long run.

I agree, but I meant that since I've started building my rods seem to multiply much quicker than when I was buying factory