Hot Blue

[Deer_Hunter]

I managed to dip some parts in my ultrasonic cleaner with brass cleaning solution in it - stripped off the bluing.

So looking to have the whole barrel and some chokes re-blued.

Looking About two decades ago I had a rifle barrel blued by someone in Calgary

Ran his operation out of his basement - Rundle area if memory serves correct. No idea what his name was or if he is still operating.

Looking for any recommendations

[45/70/500]

that would have been a guy that called his shop The Rifleman , i have since heard he has gone to the happy hunting ground, you could try Garry Valla he does excellant work but is sometimes slower than the second coming

[Deer_Hunter]

Originally Posted by 45/70/500

that would have been a guy that called his shop The Rifleman , i have since heard he has gone to the happy hunting ground, you could try Garry Valla he does excellant work but is sometimes slower than the second coming

Yes! That was him, somehow I remember that name clearly now.

Thats too bad if he passed away, he did really excellent work.

Thank you for the other name

[fps plus]

Are you sure they are blued steel parts or aluminum that is anodized ?

[FishOutOfWater]

Originally Posted by fps plus

Are you sure they are blued steel parts or aluminum that is anodized ?

Who makes aluminum barrels and/or chokes ? Are you sure you have your reading glasses on ? OP clearly stated what he needed blued.

LoL

[FishOutOfWater]

And tagged for reference... Pulled out the Mossberg 930 yesterday after being in the case for 2 years, rusty barrel.

Not sure if I want it blued, or Cerakote. Might get the whole thing done in FDE.

[schleprock]

Jennings custom gunsmithing out of Kamloops bc is supposed to be the man as far as hot bluing goes.