|
10-22-2019, 03:32 PM
|
|
|
|
Join Date: May 2007
Location: Edmonton
Posts: 1,714
|
|
30-30 powder question
i have 1979 Winchester 94 in 30-30. I want to work up a load, and the powders that I have on hand are, Leverevolution, IMR 4198,H4198,H4895 and IMR 4320.
Now all of these are listed in the manuals I have. I would like to know if any of you use any of these regularly in your 30-30 with success.
Is there an ultimate 30-30 powder?
I will be using Sierra 30-30 170gr FN as I have lots of these.
I do not have any FTX to go along with the Leverevolution powder if that makes a difference.
Your thoughts and recommendations would be greatly appreciated.
Thanks.
|
10-22-2019, 03:45 PM
|
|
|
Join Date: Jan 2008
Posts: 4,329
|
|
powder
Win 748 is all I've used for 40 years with both the 150-170gr bullets.
|
10-22-2019, 03:48 PM
|
|
|
Join Date: Jan 2013
Posts: 2,931
|
|
I use leverlution with the ftx with good results as a hunting round. I also use h4895 with hornady and Nosler 170 gr round nose pills
|
10-22-2019, 03:57 PM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,576
|
|
I just checked the data I have access to and Lever Evolution comes out on top with the 170 grain bullet
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
10-22-2019, 04:48 PM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,612
|
|
Varget
BLC2
4895
3031
Benchmark
LeverEvalution
__________________
There are no absolutes
|
10-22-2019, 07:42 PM
|
Banned
|
|
Join Date: Nov 2008
Posts: 821
|
|
I run cfe223 and leverevolution. Cfe223 is much cleaner in my jm marlin. I'm getting good groups 1.5gn less then Lee suggests for maximum load. Same deal with 150 or 170gr.
|
10-23-2019, 12:12 AM
|
|
|
|
Join Date: Feb 2010
Location: In the woods
Posts: 8,923
|
|
Not a 3030 but I have reloaded for years for it a bigger brother the 35 Remington. Use LeveRevolution, Hornady FTX bullets and rem 9 1/2 primers and have had great success. So much so I never bothers to try a different powder or primer. (Was set on the FTX).
__________________
I feel I was denied, critical, need to know Information!
|
10-23-2019, 04:17 AM
|
|
|
Join Date: May 2014
Location: Calgary
Posts: 1,747
|
|
Varget - I put that $#!/ in everything!
Colin
__________________
Check out my new book on Kindle - After The Flesh.
|
10-23-2019, 07:34 AM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,576
|
|
Quote:
Originally Posted by catnthehat
I just checked the data I have access to and Lever Evolution comes out on top with the 170 grain bullet
|
FWIW, my load for moose bears and deer when I used was 30 grains of IMR 3031 with a 170 grain bullet when a 30/30 single shoot was my main rifle .
LI have also loaded a smattering of powders in it and they all worked well including Varget but when thee 30/30 was my main hunting and trapping gun was many years before Varget was on the market .
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
10-23-2019, 08:50 AM
|
|
|
|
Join Date: May 2007
Location: Edmonton
Posts: 1,714
|
|
Thanks for all the replies. This should be a fun time, I will try and use up what I have in Leverevolution and 4895 this weekend then look at your favourites. It will be hard for me determining which is best as I have never used peep sights so being consistent on my part will be the key.
|
10-23-2019, 09:51 PM
|
|
|
Join Date: Jan 2008
Posts: 4,329
|
|
Data
Win 748/34.5gr-150gr bullet /Fed or CCI mag primer /win brass
Win 748/32gr-170gr bullet/Fed or CCI mag primer /win brass
40 years of stacking deer ,bear and moose.
Both loads out of the Ken Waters Pet Loads manual.
|
10-28-2019, 11:29 AM
|
|
|
Join Date: Oct 2017
Posts: 308
|
|
Imr 4198 for full power loads.
Unique for plinking loads
__________________
A man is only as good as his word.
Tight lines.......straight shooting
|
10-28-2019, 12:33 PM
|
|
|
Join Date: Jun 2007
Location: Calgary, AB
Posts: 623
|
|
Going to be testing a few of those powders soon in my Mossberg 464.
Sent from my SM-G970W using Tapatalk
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 01:53 PM.
|