|
11-11-2019, 12:01 PM
|
|
|
Join Date: Dec 2011
Location: Cold Lake
Posts: 1,723
|
|
Help finding bolt
So, I'm in deer camp at the moment and had a mishap with my rifle. I broke my bolt. Borrowing buddies rifle for now. Can anyone help me source a new bolt for a Sako L57? Western gun parts is a no go.
I'd really like to get this fixed as the rifle is beautiful and passed down from my late uncle.
Thanks.
|
11-11-2019, 12:40 PM
|
|
|
Join Date: Jan 2008
Posts: 4,332
|
|
i have to ask
How do you break a bolt aside from beating the action open with a club? Remington comes to mind.
|
11-11-2019, 12:49 PM
|
|
|
|
Join Date: May 2009
Location: near Calgary
Posts: 6,651
|
|
not like you can drop in a new bolt
gunsmith is probably required if you can find a bolt and fit it in your rifle for headspace etc. Cant likely drop in and go.
__________________
a hunting we will go!!!!!!
|
11-11-2019, 01:00 PM
|
|
|
|
Join Date: Jan 2019
Posts: 53
|
|
Ruger 223
I break the bolt on my Ruger 223, Last week I left my rifle on the back of my truck on the hunting camp site, next day around 9 am was -20 degree, I took the rifle to shoot a coyote at the time I loaded I fill the bolt hard to close, after I shoot, I can not open the bolt 2 day ago at home (the rifle was warm) I try again and bolt open but the bolt body have a crack and the extractor broken, I think was over pressure, so do not shoot your rifle when is so cold
__________________
|
11-11-2019, 01:19 PM
|
|
|
Join Date: Jun 2007
Posts: 412
|
|
You should have told me about the cold and bolt issues 50 years ago when I started calling coyotes.Have never had an issue with a bolt breaking in the cold with a variety of rifle makes.This even includes the Rem 788 which is known to have a weak bolt arm.
|
11-11-2019, 01:20 PM
|
|
|
|
Join Date: Dec 2012
Posts: 1,651
|
|
Quote:
Originally Posted by NicoyaHunt
I break the bolt on my Ruger 223, Last week I left my rifle on the back of my truck on the hunting camp site, next day around 9 am was -20 degree, I took the rifle to shoot a coyote at the time I loaded I fill the bolt hard to close, after I shoot, I can not open the bolt 2 day ago at home (the rifle was warm) I try again and bolt open but the bolt body have a crack and the extractor broken, I think was over pressure, so do not shoot your rifle when is so cold
|
I have shot a rifle in a lot colder than -20°C with no issues. How about do not shoot hot loads from your rifle.
__________________
There is no God higher than truth - Gandhi
Protect the oppressed even if an enemy, never forgive the traitor especially if he is your friend
|
11-11-2019, 01:23 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,155
|
|
Quote:
Originally Posted by NicoyaHunt
I break the bolt on my Ruger 223, Last week I left my rifle on the back of my truck on the hunting camp site, next day around 9 am was -20 degree, I took the rifle to shoot a coyote at the time I loaded I fill the bolt hard to close, after I shoot, I can not open the bolt 2 day ago at home (the rifle was warm) I try again and bolt open but the bolt body have a crack and the extractor broken, I think was over pressure, so do not shoot your rifle when is so cold
|
The problem wasn't the cold, but it may have had something to so with it being difficult to close the bolt.
__________________
Only accurate guns are interesting.
|
11-11-2019, 01:26 PM
|
|
|
|
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
|
|
Quote:
Originally Posted by Pioneer2
How do you break a bolt aside from beating the action open with a club? Remington comes to mind.
|
Bolt handles can be welded.
Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
|
11-11-2019, 01:33 PM
|
|
|
Join Date: Aug 2008
Location: Leslieville
Posts: 2,503
|
|
Why do guys have to chip in with their smart ass remarks? Offer advice if you know something helpful and move on if you don’t.
__________________
We talk so much about leaving a better planet to our kids, that we forget to leave better kids to our planet.
Gerry Burnie
|
11-11-2019, 01:47 PM
|
|
|
Join Date: Sep 2007
Location: Strathcona County
Posts: 1,896
|
|
I think the fellows are trying to be helpful.
If you fire a round and it blows off the extractor and cracks the bolt there is something more that is wrong than getting a new bolt is going to fix.
|
11-11-2019, 02:00 PM
|
Banned
|
|
Join Date: Jan 2017
Posts: 182
|
|
Quote:
Originally Posted by Hogie135
So, I'm in deer camp at the moment and had a mishap with my rifle. I broke my bolt. Borrowing buddies rifle for now. Can anyone help me source a new bolt for a Sako L57? Western gun parts is a no go.
I'd really like to get this fixed as the rifle is beautiful and passed down from my late uncle.
Thanks.
|
U should consult a reputable smith with the full story. You don't want to repeat or kill yourself.
|
11-11-2019, 02:07 PM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,052
|
|
Quote:
Originally Posted by andy1
U should consult a reputable smith with the full story. You don't want to repeat or kill yourself.
|
Quote:
Originally Posted by Buckhead
I think the fellows are trying to be helpful.
If you fire a round and it blows off the extractor and cracks the bolt there is something more that is wrong than getting a new bolt is going to fix.
|
Both of these guys are spot on. Not doing the OP any favors telling him where to find another bolt till he fixes the issue that pooched the first one.
|
11-11-2019, 02:25 PM
|
|
|
|
Join Date: Nov 2008
Posts: 11,372
|
|
What exactly broke on your bolt?
__________________
“One of the sad signs of our times is that we have demonized those who produce, subsidized those who refuse to produce, and canonized those who complain.”
Thomas Sowell
|
11-11-2019, 03:03 PM
|
|
|
Join Date: Dec 2011
Location: Cold Lake
Posts: 1,723
|
|
Ok folks, nothing wrong with the gun. It was my stupidity that broke it. Being in deer camp now for last ten days, I decided to bring the gun in from the cold for an oiling.
After taking the bolt out (you'll have to excuse my terminology here), it twists out of position and cant get it back in until it twists back so it goes back in. After trying to google it with crap service, I read a lot of guys put bolt in vise and use channel locks to twist back. I have no Vise so I used two channels locks.
Long story short, I didnt place channel locks properly and broke off one side of the guide (?)
|
11-11-2019, 03:08 PM
|
|
|
Join Date: Dec 2011
Location: Cold Lake
Posts: 1,723
|
|
Here's a pic
|
11-11-2019, 03:34 PM
|
|
|
Join Date: May 2007
Posts: 15,848
|
|
Looks to me like it can be repaired.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
11-11-2019, 03:36 PM
|
Banned
|
|
Join Date: Feb 2015
Location: south calgary
Posts: 2,281
|
|
Take it in and see if can be fixed
|
11-11-2019, 04:25 PM
|
|
|
Join Date: Sep 2015
Posts: 1,841
|
|
The part that is off of bolt is the bolt guide,I assume you blew the extractor right off. Those parts should be available. The bolt needs to be inspected for cracks and the headspace May have been set back
NOTE. The cold did not cause this . This is a pressure issue from ammo!
|
11-11-2019, 04:28 PM
|
|
|
Join Date: Dec 2011
Location: Cold Lake
Posts: 1,723
|
|
Quote:
Originally Posted by fps plus
The part that is off of bolt is the bolt guide,I assume you blew the extractor right off. Those parts should be available. The bolt needs to be inspected for cracks and the headspace May have been set back
NOTE. The cold did not cause this . This is a pressure issue from ammo!
|
Had nothing to do with a shot from the rifle. It was me being careless.
|
11-11-2019, 04:28 PM
|
|
|
Join Date: May 2007
Posts: 15,848
|
|
Quote:
Originally Posted by fps plus
The part that is off of bolt is the bolt guide,I assume you blew the extractor right off. Those parts should be available. The bolt needs to be inspected for cracks and the headspace May have been set back
NOTE. The cold did not cause this . This is a pressure issue from ammo!
|
You are reading two different stories.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
11-11-2019, 05:23 PM
|
|
|
Join Date: May 2018
Location: NWO
Posts: 210
|
|
Isn't that just the claw extractor that is broken in pic? Maybe not that big a deal provided you can find one.
|
11-11-2019, 05:44 PM
|
|
|
Join Date: Feb 2015
Location: Millet
Posts: 861
|
|
Quote:
Originally Posted by mryimmers
Isn't that just the claw extractor that is broken in pic? Maybe not that big a deal provided you can find one.
|
That's what it is, been awhile since I disassembled a M98 bolt but I remember the extractor was a pain. Seemed fragile to reinstall.
|
11-11-2019, 06:00 PM
|
|
|
Join Date: May 2018
Location: NWO
Posts: 210
|
|
|
11-11-2019, 06:26 PM
|
|
|
|
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
|
|
Quote:
Originally Posted by Hogie135
Here's a pic
|
Looks like it just came off the retaining clip, no big deal.
Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
|
11-11-2019, 07:37 PM
|
|
|
Join Date: Mar 2011
Location: Fox Creek
Posts: 3,315
|
|
So, is it the guide, or extractor? Can't see anything that is actually broken, from the picture. Shouldn't have to use vice grips or a bench vise to rotate the bolt. And if so, use padding, or wood.
Whatever it is, you definitely don't need a whole bolt. Never heard of a Mauser style claw extractor being described as fragile, though maybe the Ruger ones don't have as much spring.
__________________
Profanity and name calling are poor substitutes for education and logic.
Survivor of the dread covid
Pureblood!
|
11-11-2019, 09:31 PM
|
Banned
|
|
Join Date: Mar 2017
Posts: 863
|
|
Quote:
Originally Posted by Grizzly Adams
Looks like it just came off the retaining clip, no big deal.
Grizz
|
Yup, just looks like it needs reassembly.
|
11-12-2019, 12:09 PM
|
|
|
Join Date: Sep 2015
Posts: 1,841
|
|
You are missing the little locking clip spring . You used to have to buy the whole assembly to get the spring .
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 01:39 PM.
|