What’s your hunting setup?

[house21]

Prime Logic
32” DL 72lb DW
Spothogg fast Eddie sight
Vapour trail rest
Tightspot quiver
Beestinger stabilizer
Gold Tip Kenitic Pierce 300 arrows
125 grain tooth of the arrow broadheads

[normanrd]

Hoyt Helix Turbo 70# @ 28.75" dl (measured)
MBG ascent 5 pin
Victory Vforce Elite 300
Bohning Heat vanes
100 grain TOTA or Annhialators
Tight spot 5 arrow quiver
Vapor Trail Pro V dropaway
B-stinger stabilizer

426 grains @306 fps @ 70# @ 28.75"

[510-Gem]

Elite Synergy ~ 65lb
QAD rest
Spot Hogg 5 pin
Tight Spot Quiver
Bee Stinger stab
Easton Axis 28.5” w G5 Strykers or Tooth of the Arrow 100 grain cut on contacts
Scott Release

Really like this set up. I shot everything Lawrence had in his shop one night 5 years ago and the Elite came home and killed ever since.


Sent from my iPhone using Tapatalk

[bakerman]

Mamba m6 68lbs, trijicon accupin sight, easton bloodline 330 with a good ol whisker biscuit rest and G5 6arrow quiver.

[Lefty-Canuck]

Bowtech Reckoning 35, 29.5” 71lbs
440gr arrow, Victory V-Force Elite 300, 4 fletched 2.25” X-Vanes
100 gr TOTA 1x1”
Spot Hogg Fast Eddie XL, 5 pin housing
Hamskea Hunter Pro
10/8 Beestinger 4oz front/3oz back
Anchor Sight
60X Strings
Tight Spot Quiver
Scott Echo release

LC

[brobinson]

Bow: Mathews Traverse
Strings: 60X Custom Strings
Draw Weight: 73lb
Draw Length: 29.5”
Sight: Spot Hogg Fast Eddie XL 3 Pin
Quiver: Mathews Web HD
Stabilizer: Bee-stinger ProHunter 10" (Front), Bee-stinger Prohunter 8" (Back)
Rest: Hamskea Trinity Hunter Pro
Shaft: Killin Stix Original
Spine: 250
Length: 29”
Insert: Ethics Archery 100gr Stainless Steel
Vanes: 4 Fletch AAE Plastifletch MAX 23
Wrap: Bohning 4"
Nock: Bohning Double Lock
Broadhead: 100gr SlickTrick Original
Total Arrow Weight: 518gr
Velocity: 275FPS
FOC: 16.5%

[mackenzie91]

Bow: Mathews V3
Strings: zebra (waiting on gas strings to come)
Draw Weight: 70lb
Draw Length: 30”
Sight: Spot Hogg Fast Eddie XL 2 Pin
Quiver: Tight spot rise 5 arrow
Stabilizer: Bee-stinger Micro hex 10" (Front), Bee-stinger microhex 8" (Back)
Rest: Hamskea Trinity Hunter Pro
Shaft: easton hexx
Spine: 260
Length: 29”
insert: 75grain brass
broadhead: 125 gr sevr 1.5

[Engels]

Bowtech Insanity CPX
29" draw
70lbs
Spot Hogg Hunter 7 pin sight
QAD HDX
tightspot quiver
Scott Ascent micro Hinge release
GT XT Hunter 300 spine at 29.5inches
100 gr Magnus Black Hornets
3 blazer and standard nock
Total arrow weight is 430 grains

[schreyer]

Ordered an APA king cobra with 70# draw weight. Should be here in a few weeks!

[jlagman]

APA Mamba Air, 26" draw length, ~70lbs draw weight
APA Twister FC rest
Black Gold Ascent Verdict Assault, 3 pin
Option Archery Quivalizer

Gold Tip Velocity XT, 300 spine with 100gr brass inserts, finished weight ~455gr

When I last fired it through a chronograph, I got about 252fps, which, considering I have a short draw length, I don't think is too shabby.

[Hatchet07]

This is my new favourite thread
Never hunted yet; can’t wait.
Currently practicing with a Quest G5, 70# draw and 29.5” draw. Looking to upgrade but it’s a good practice bow and I love it. Look forward to being able to afford an upgrade.
I also recently bought a recurve through Amazon (I’m not rich) and though it was a very “affordable” bow it meets my current needs. Only a 55# draw but feels nice.

Very curious where you all would recommend shopping, practicing, etc.
I live in parkland county and haven’t been to any local spots in years.

[Old longBow]

Well I have a PSE Sequoia, 45#@28inch, wood and glass and a fur thingy on the rest...Arrows are cedar with zawicky broadheads, and them feathery thingys on the shaft...
Deer yes, Elk Yes, Moose yup...
When I pull back the arrows go forward, works for me?

[shooter12]

Bowtech 340 Destroyer

27.5" draw lengh
67 Lb
Maxima 350 spine
3 Blazer veins
Wasp Bullet 100 gr , 385 gr total weight.
292 FPS

S12

[Rod in the sticks]

After 14 years, upgraded my bow
Hoyt Ventum 30 @ 72 lb
QAD HDX
Fast Eddie XL
GT Hunter XT w/ blazers
Tightspot quiver
Slick trick & NAP Killzones
Trufire Edge release
Thinking about a new stabilizer but still using the stock one.

[Scottmisfits]

My last bow was Hoyt. I can't justify the expense to get back in to a Hoyt again, although I really.did like that bow.
I just, about a month ago, got my hands on a Diamond Carbon Deploy. Light, pretty much dead in the hands, and quiet.
I have a RipCord Ace, Black Gold Ascent Verdict sight, Scott Sabertooth release, and I'm about to switch to Victory arrows after shooting Easton for years.

[Munchymoo]

Prime Nexus 4
30.75" draw - 60 lbs
MBG 3 pin Ascent Verdict
QAD HDX
8" MicroHex Stabilizer
Tight Spot 5 Arrow
Fletcher .44 Calibre Release
CE Adrenaline 350 spine
125 gr Montec
Total arrow weight is 480 grains

I am still deciding if I am going to run with or without the stabilizer. Some days I am better with it on and some days I am better without it. The bow seems to balance well and feel just fine without the stabilizer on but I am having a hard time wrapping my head around going without it in the field.

[tmcgowan88]

PSE Bow Madness

28" draw length- 67 lbs
Carbon express destroyers 350 spine
Trophy ridge react H5 sight
Trophy ridge stabilizer
QAD hdx rest
G5 Montech broadheads 100G
Tru-fire hard-core foldback release

[Schilly97]

Bow: Hoyt Helix Ultra
Draw Weight: 70 lbs
Draw Length: 28.5”
Shaft: 5mm East on Axis Match Grade
Spine: 300 Spine
Length: 28.25”
Insert:50 grain brass
Vanes: 4 AAE Max Stealth Vanes
Wrap: 4inch white wraps
Nock: East on G nock
Broadhead: Magnus G5 Montecs and 2.1 inch sevr mechanicals.
Total Arrow Weight: 525 grains
Velocity: never chronoed
KE: don't care
Momentum:
FOC: don't care