Go Back   Alberta Outdoorsmen Forum > Main Category > Trapping Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 08-16-2018, 12:06 AM
Jtstahl's Avatar
Jtstahl Jtstahl is offline
 
Join Date: Dec 2017
Posts: 54
Default .243 ammo for minimum pelt damage

Hey guys.

I went out this summer and bought a Tikka .243 mainly for deer and bigger game. Instead of spending extra money on a smaller caliber I would like to use this gun for coyotes aswell. My question is, when it comes to coyote hunting, what ammo do I buy for minimum pelt damage. I've been looking at some varmint x ammo, (55 and 58 grain) the thing is, there are so many diffrent bullet tips I'm kinda stuck at what would be the best. Any advice would be appreciated.

Thanks in advance.

Sent from my SM-N950W using Tapatalk
Reply With Quote
  #2  
Old 08-16-2018, 06:55 AM
bucksnbears bucksnbears is offline
 
Join Date: Feb 2015
Location: Minnesota
Posts: 616
Default

Not a fan of the lightweight bullets.
I'd stick with a heavier deer type one.
__________________
winner of the first annual CoyoteHunter.net tournament seiries.
Reply With Quote
  #3  
Old 08-16-2018, 07:30 AM
325home 325home is offline
 
Join Date: Feb 2010
Location: West Can
Posts: 69
Default

This is one of those situations where you likely will get as many different answers as the number of people you ask. I have tried many different bullets for coyotes and have settled on the v-max 58 gn Hornady. They are extremely accurate in my 243's and knock the coyotes down (most of the time) with acceptable damage. Of course there have been exceptions but this has become my go to bullet for coyotes.


For deer, I load heavier bonded bullets (>85 g).


I tried using the heavier bullets for both deer and coyotes, but got frustrated with pencil hole straight through holes on coyotes that were shot at close range. Tracking wounded coyotes in deep snow is not my thing.


I obviously adjust for POI when I switch bullets. It is surprisingly not a big change.
You could also just make the adjustment in the field if you get in a situation where you have to. This rarely happens, since I won't take a shot at a coyote if I'm shooting deer and vis versa.


Hope this helps.
Reply With Quote
  #4  
Old 08-16-2018, 08:46 AM
209x50's Avatar
209x50 209x50 is offline
 
Join Date: May 2007
Posts: 5,412
Default

Pretty much nothing you will shoot out a 243 will be fur friendly. Everyone goes to smaller bullets for fur but the smaller bullet goes faster than the deer load, usually with explosive results. There is no single cartridge that will be great on fur right from 0 to 700 yards. Some (204, 22 hornet) are great to 200 yards then others (22-250, 223) take over out to greater distances. Were i to use my 6mm Creed (very close to the 243 ballisticly) for coyotes it would be a 400 yard plus gun and then I'd be using the big (108 grain) high BC bullets to fight wind drift.
Reply With Quote
  #5  
Old 08-16-2018, 09:27 AM
Marty S Marty S is offline
AO Sponsor
 
Join Date: Apr 2011
Posts: 2,476
Default

Shoot 100 grain PSP, stay very far away from all that plastic tip crap. Don't use fast ammo. Always shoot for the ribs regardless of calibre.

If you're buying, just shoot Federal Classic 100 gr PSP.

.243 with heavy, deep penetration ammo is awesome. Good long range calibre as it will still have energy to do the job if you ever want to join the long range shooting cult with its $1400 scopes!

Good gun!
Reply With Quote
  #6  
Old 08-16-2018, 03:49 PM
bushbug bushbug is offline
 
Join Date: Jan 2018
Posts: 118
Default

Try 70 grain FMJ's small hole
Reply With Quote
  #7  
Old 08-18-2018, 10:30 AM
philintheblank's Avatar
philintheblank philintheblank is offline
 
Join Date: Sep 2010
Location: St. Albert
Posts: 999
Default

Quote:
Originally Posted by Marty S View Post
Shoot 100 grain PSP, stay very far away from all that plastic tip crap. Don't use fast ammo. Always shoot for the ribs regardless of calibre.

If you're buying, just shoot Federal Classic 100 gr PSP.

Good gun!
X2 i was using 90gr PSP when i hunted with a .243

Most of my shots were in/out, sometimes a toonie hole to sew
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:32 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.