Go Back   Alberta Outdoorsmen Forum > Main Category > Fishing Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 02-17-2012, 03:57 AM
rottik9 rottik9 is offline
 
Join Date: Nov 2011
Location: Lafond
Posts: 338
Default pike on the fly.

I have fished for salmon and trout, on the fly....and tried to fish pike with the same gear. I had a hard time casting the big flies. If anyone viewing this has any recommendations around gear needed to try this, please let me know. I have watched it on utube and it looks like a lot of fun.

Last edited by rottik9; 02-17-2012 at 03:59 AM. Reason: mistakes
Reply With Quote
  #2  
Old 02-17-2012, 04:24 AM
Rabadswompe's Avatar
Rabadswompe Rabadswompe is offline
 
Join Date: Dec 2011
Posts: 14
Default

I've caught some small one with my trout rig, floating line and a simple strip of white rabbit fur ... was aiming for bass but hey... a fight is a fight!
Reply With Quote
  #3  
Old 02-17-2012, 06:09 AM
Mxyzptik Mxyzptik is offline
 
Join Date: Jun 2010
Location: Westlock
Posts: 590
Default

Casting big flies is tough but the proper gear can help you a lot. You need a good big rod with lots of back bone but perhaps more important is the fly line. One with a short front taper so it turns over quickly is what I found helped me cast the big flies.
__________________
To a worm in horseradish, the world is horseradish !
Reply With Quote
  #4  
Old 02-17-2012, 06:21 AM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,576
Default

I have fished for them off and since I got m first fly rod at age 12.
Used everything on them from mice to streamers, and floating lines to sinkers.
My pick is a fiberglass 8weight and a fairly large streamer , but nothing so big as to be ungainly.
I tried the mega divers and stuff,, and to be honest, unless you are in trophy waters , you can get them with a Mickey Finn tied on a larger 3366 Sproat hook or a similar sized hook .
They don't have to be fancy, and neither does your gear.
I use glass because at Times I have to horse them out of big weeds or timber when I'm fishing the small tributaries around here, and the the river is veruy silty, so expensive lines and rods get worn as fast as cheap ones.
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!

Last edited by catnthehat; 02-17-2012 at 06:36 AM.
Reply With Quote
  #5  
Old 02-17-2012, 06:32 AM
Lefty-Canuck's Avatar
Lefty-Canuck Lefty-Canuck is offline
 
Join Date: Dec 2010
Location: Look behind you :)
Posts: 27,780
Default

For a rod I use between a 8-10wt with matching (same weight) weight forward floating line. Salt water mono for a leader. You can also find some "species specific" lines that work well. Casting technique I use is either single or double haul....pretty basic. I tie my own flys and use 3/0 eye level hooks with a 4-6 inch streamer. Spring pike is the most fun you can have with your waders on!

Personally......I think 7wt is as low as I would go as although an epic 30minute plus fight is exciting it can play the fish to death

LC
__________________
Reply With Quote
  #6  
Old 02-17-2012, 06:34 AM
Mxyzptik Mxyzptik is offline
 
Join Date: Jun 2010
Location: Westlock
Posts: 590
Default

Quote:
Originally Posted by catnthehat View Post
I have fished for them off and since I got m first fly rod at age 12.
Used everything on them from mice to streamers, and floating lines to sinkers.
My pick is a fiberglass 8weight and a fairly large streamer , but nothing so big as to be ungainly.
I tried the mega divers and stuff,, and to be honest, unless you are in trophy waters , you can get them with a Mickey Finn tied on a larger 3366 Sproat hook or a similar sized hook .
They don't have to be fancy, and neither does your gear.
I use glass because at Times I have to horse them out of big weeds or timber when I'm fishing the small tributaries around here, and the the rib=ver is veru silty, so expensive lines and rods get worn as fast as cheap ones.
Cat

I agree Cat, mine rod is a stout ffibreglass rod that was my Dad's. I don't know who made it as there are no marking but it has the beautiful patterned lacing that you don't see anymore. The most fun I ever had with it was at Tobin Lake casting a big deer hair mouse but man I was wicked dangerous with it. You had to make sure and wear a brimmed hat so you didn't take yout ear off. Good thing I pinched the barbs on that mouse as my son had to extricate it from between my shoulder blades.

The short front taper was taught to me by Chris Sepio at that big fly fishing show in Calgary. After I did that I was able to get things under control a great deal easier.
__________________
To a worm in horseradish, the world is horseradish !
Reply With Quote
  #7  
Old 02-17-2012, 06:39 AM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,576
Default

The rod I use most , believe it or not, is the same rod I got when I was 12!!
it's a Heddon Pal, and it has been oressed into service on three fly in trips when I broke graphites ( two up north for pike and one to Mexico).
I use a short leader of 40lb Mason line and a very short wire tippet on my lines.
The Mason turns over super.
I've re-guided that old Heddon twice now!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #8  
Old 02-17-2012, 07:34 AM
Whiskey Wish Whiskey Wish is offline
 
Join Date: Dec 2008
Location: Just this side of no-where on the edge of common sense
Posts: 1,468
Default

I used to take my canoe and sit just off the weeds and cast either a mouse or my home made version of a duckling (it was truly ugly...) just into the edge of the weed bed.

At times there was truly explosive action as the pike would come completely out of the water they would hit those lures so hard. I even caught a couple of walleye with those home made lures. But yeah...really hard on equipment!

It sure felt good though getting back on soft water after 6 months of looking at fools fishing hard water.
Regards,
Dave.
Reply With Quote
  #9  
Old 02-17-2012, 06:01 PM
canadianhunter's Avatar
canadianhunter canadianhunter is offline
 
Join Date: Oct 2008
Location: West Central, Alberta
Posts: 98
Default

Definitely 8-10wt and then throw everything big and ugly at them. Streamers, poppers, mice, even big chronomids. First one I ever caught was at the west Lethbridge trout pond. Thought I tied into a big brookie but then it started rolling on me. Five pound pike, belly full of fingerlings. Would like to know who thought that was a good idea?
As far as distance for casting, I have found 20-30 feet is fine. Slowly walk the reeds and other cover. The pike will be there. I've had large pike come right into shallow water where their backs were out of water.
Some patience, lots of flies, and tough leader is all you need.
Have fun!
Reply With Quote
  #10  
Old 02-17-2012, 06:12 PM
Jayhad Jayhad is offline
 
Join Date: Jul 2011
Posts: 2,050
Default

Rio Pike Line, casts huge double bunnies with ease
http://www.rioproducts.com/fly-lines...specialty/pike
Reply With Quote
  #11  
Old 02-17-2012, 06:40 PM
gilbertslake's Avatar
gilbertslake gilbertslake is offline
 
Join Date: Oct 2009
Posts: 954
Default

Quote:
Originally Posted by Jayhad View Post
Rio Pike Line, casts huge double bunnies with ease
http://www.rioproducts.com/fly-lines...specialty/pike
Just bought one of these in a WF10F I can't wait to use it this summer.

I have a 10 WT Cortland 444 shooting head which turns over # 2 Bombers for Atlantic salmon quite well, but I feel it would not handle big rabbit strip flies too good, so I decided to get the Rio.

I have also ordered this book http://www.pikeflyguy.com/ As I don't want to spend half of the summer figuring things out. I hope it has the info I need for pike.

I have now filled a box with Dahlberg Divers, Bunny Leeches, Popper flies, Mice patterns and big marabou flies. so I am ready to go.
Reply With Quote
  #12  
Old 02-17-2012, 07:07 PM
35 whelen 35 whelen is offline
 
Join Date: Jul 2010
Location: GRAND PRAIRIE
Posts: 5,720
Default

have done lots of fishing for pike in waters that were clear didnt need to cast to far mostly sight fishing ,i used 4to6in streamers with sinktip line ,black and yellow were always good ,i used 9wt 2peice loomis 9ft rod with sth reel good luck
Attached Images
File Type: jpg old pictures#2 006.jpg (90.1 KB, 68 views)

Last edited by 35 whelen; 02-17-2012 at 07:20 PM.
Reply With Quote
  #13  
Old 02-17-2012, 09:40 PM
rottik9 rottik9 is offline
 
Join Date: Nov 2011
Location: Lafond
Posts: 338
Default Thank you

Thank you all, for your feedback...im sure to use the advise this spring.
Reply With Quote
  #14  
Old 02-17-2012, 09:42 PM
BeeGuy BeeGuy is offline
Banned
 
Join Date: May 2011
Location: down by the river
Posts: 11,428
Default

A tippet and leader with similar stiffness can make a difference when casting.
Reply With Quote
  #15  
Old 02-17-2012, 11:38 PM
Justanotherbuck2's Avatar
Justanotherbuck2 Justanotherbuck2 is offline
 
Join Date: Jan 2008
Location: Namaka, Ab.
Posts: 979
Default

We fish pike on the fly all the time, but I prefer a number ten rod so I have enough backbone to bring it in within a reasonable time, we practice catch and release so I don't want the fish to be worn out, Large colorful streamers ,lots of red and yellow maribou nothing under three inches, short casts from the boat into the weed banks , my largest to date 42inches close to 32 lbs, a buddy of mine got one a couple of years ago that I posted on here at 48inches close to an Alberta record but just off, we never weighed her.
Reply With Quote
  #16  
Old 02-18-2012, 09:39 AM
Dust1n Dust1n is offline
 
Join Date: Mar 2010
Location: Central Alberta
Posts: 4,306
Default Spring Pike

8wt with wt forward floating line in the spring.
Black or white and another color seem to work best for me.
Flies that push water will get you the most hits so your best bet is the bunny leech all beefed up. Flies that don't collect water will make it easier to cast so flies made from crystal flash are also productive.As soon as you see the wake behind your fly start stripping harder/faster as this will get the chase on. Sightfishing them with black leechs work too quite effectively. Iv never seen a spring pike refuse one. Also dont be afraid to throw your streamer a few inches from shore as the pike and walleye will chase schools of minnows there and feed up. Double Bunnies, Bunny Leech, Bull Dawg are some of my favorite patterns

You may wonder where to fish...you want to fish in the warmest water of the lake so scout out black or darker bottom because that extra few degrees or so will speed up the pikes metabolism making them more aggressive then the other places in the lake.
Reply With Quote
  #17  
Old 02-18-2012, 11:41 AM
Lornce's Avatar
Lornce Lornce is offline
 
Join Date: Mar 2010
Location: Calgary
Posts: 2,669
Default

for a great many years I used an 8 ft 8 wt Fenwick fiberglass rod. Last 4 years its been a 12.5 ft 6 wt Spey rod with heads. I find it much easier to punch out large flies especially in wind.
__________________
Often I have been exhausted on trout streams, uncomfortable, wet, cold, briar scarred, sunburned, mosquito bitten,
but never, with a fly rod in my hand have I been in a place that was less than beautiful.

My blog - casting on the waters

fishing regulations and facts on fish handling
Fishing Regulations
Reply With Quote
  #18  
Old 02-18-2012, 11:02 PM
Doc's Avatar
Doc Doc is offline
 
Join Date: May 2007
Location: Edmonton
Posts: 492
Default

Here's a couple of links you may find useful.

Article: Got Pike?

Video: Pike On The Fly

Cheers,
Doc
__________________
Visit my BLOG.
Reply With Quote
  #19  
Old 02-19-2012, 07:42 PM
CantThinkOfAName's Avatar
CantThinkOfAName CantThinkOfAName is offline
 
Join Date: Mar 2009
Location: Edmonton
Posts: 335
Default

Where do you guys pick up some of those monster flies? I don't recall seeing big pike flies last time I was at FH or WS.
Reply With Quote
  #20  
Old 02-19-2012, 07:43 PM
Dust1n Dust1n is offline
 
Join Date: Mar 2010
Location: Central Alberta
Posts: 4,306
Default

You dont buy them. You tie them and it takes little skill to tie them too!
Reply With Quote
  #21  
Old 02-19-2012, 10:02 PM
gilbertslake's Avatar
gilbertslake gilbertslake is offline
 
Join Date: Oct 2009
Posts: 954
Default

Quote:
Originally Posted by CantThinkOfAName View Post
Where do you guys pick up some of those monster flies? I don't recall seeing big pike flies last time I was at FH or WS.
If you check on the Icky Fly Works banner in the top adds and go to the streamers section, they have double bunnies in # 2 that should work.

I just tied up some # 2/0 marabou flies on wide gape hooks and added weed guards and clipped deer hair heads. I am hoping the pike find them appetizing
Reply With Quote
  #22  
Old 02-19-2012, 10:04 PM
Muskeg Muskeg is offline
 
Join Date: Jan 2008
Location: Peace Country
Posts: 255
Default

what weight rods do you have and we can try to match a line. where about's do you live and maybe someone can take you out.
Reply With Quote
  #23  
Old 02-19-2012, 10:09 PM
pikeslayer22 pikeslayer22 is offline
 
Join Date: Jan 2012
Posts: 3,711
Default

Top water action for Pike is the best!
Reply With Quote
Reply

Tags
fish, fishing, fly fishing, pike


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:07 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.