|
02-01-2017, 09:36 PM
|
|
|
Join Date: Dec 2012
Posts: 1,031
|
|
Ice auger suggestions!
On a previous thread, I was asking everyone which ice fishing tent they prefer, as I was interested in purchasing one, I received some real good feedback, and decided to go with the Eskimo 949i, as I will more then likely be sleeping in it, now I am in the market for a ice auger, and curious to hear some feedback on some of the brands. I had a pretty bad experience with Jiffy, and will probably be leaning towards the Eskimo, as their 5 year warranty is attractive! All feedback is welcome and greatly appreciated!
|
02-01-2017, 09:56 PM
|
|
|
|
Join Date: May 2009
Location: spruce grove alberta
Posts: 24
|
|
I have the Eskimo z51 8" and it's been great no issues in the 3 years I've had it. I would buy another if this one went missing. I also have the tent you just bought and it great as well, it will serv you well.
|
02-01-2017, 11:03 PM
|
|
|
|
Join Date: Jul 2011
Location: West Edmonton
Posts: 5,174
|
|
Both Jiffy and Eskimo offer 5 year warranty now. Jiffy vs Eskimo is personal preference imo, guys have had good or bad luck with both brands. I have used both and they are both good in my eyes. The propane augers and the ion's are good too.
I prefer a propane or ion if you use a suv/car as your main vehicle. Gas will leak and will make your car stink. I also prefer either of these for drilling inside a tent/shack, a gas motor will smoke you out.
I prefer gas or propane if you do lots of multi day trips or usually drill a ton of holes. Gas if you live up in Fort Mcmurray or north where it is often colder then here.
For propane I like the Jiffy for 8 in holes but the Eskimo for 10 in since it has lower gearing and more torque.
For Eskimo gas augers I prefer at least the 43 cc for 8 in and the 51 cc for 10 in.
|
02-02-2017, 12:03 AM
|
|
|
Join Date: Apr 2009
Location: Southern Alberta
Posts: 7,350
|
|
Or an ION.
__________________
.
eat a snickers
made in Alberta__ born n raised.
FS-Tinfool hats by the roll.
|
02-02-2017, 04:58 AM
|
|
|
Join Date: Aug 2009
Posts: 295
|
|
ION all they way... You will never regret it
|
02-02-2017, 06:25 AM
|
|
|
|
Join Date: Dec 2010
Location: My House
Posts: 13,486
|
|
Quote:
Originally Posted by RavYak
Both Jiffy and Eskimo offer 5 year warranty now. Jiffy vs Eskimo is personal preference imo, guys have had good or bad luck with both brands. I have used both and they are both good in my eyes. The propane augers and the ion's are good too.
I prefer a propane or ion if you use a suv/car as your main vehicle. Gas will leak and will make your car stink. I also prefer either of these for drilling inside a tent/shack, a gas motor will smoke you out.
I prefer gas or propane if you do lots of multi day trips or usually drill a ton of holes. Gas if you live up in Fort Mcmurray or north where it is often colder then here.
For propane I like the Jiffy for 8 in holes but the Eskimo for 10 in since it has lower gearing and more torque.
[B] For Eskimo gas augers I prefer at least the 43 cc for8 [/B]in and the 51 cc for 10 in.
|
I picked one of these up on sale for $349. I am no expert, but it zips through 24" of ice pretty darn quick. More power is always good, but this one really does get the job done very well.
|
02-02-2017, 06:33 AM
|
|
|
|
Join Date: Jan 2016
Location: Medicine Hat
Posts: 210
|
|
They are pricey to get into, but I Love our Ion! Easy to keep battery from getting too cold with an insulated lunch bag and a hand warmer. Instant on, no fumes, lots of holes. Awesome customer service when the charger had a broken LED out of the box. New charger sent immediately and keep the old one (just can't tell when it's finished a charge cycle)
|
02-02-2017, 06:47 AM
|
Banned
|
|
Join Date: Dec 2012
Posts: 928
|
|
I agree with the guys on the electric. I bought a strikemaster lithium Lazer and I'll never go back to a gas powered auger. Most new vehicles have a 120 plug so if you're going on long trips and planning on more than 40 or 50 holes you can charge it on the go. If not inverters are cheap.
|
02-02-2017, 06:48 AM
|
|
|
Join Date: Dec 2010
Location: calgary
Posts: 20
|
|
I had an older Eskimo bought it 1999 it was an 8" pirhana it was ok, but nothing like my dads 8" jiffy that was bought a few years later. An iceauger should last you along time if you store it properly in the off season. I run seafoam in mine and all toys get premium fuel, quad, pressure washer, chainsaw, etc.
|
02-02-2017, 06:28 AM
|
|
|
|
Join Date: Dec 2010
Location: My House
Posts: 13,486
|
|
Quote:
Originally Posted by RavYak
Both Jiffy and Eskimo offer 5 year warranty now. Jiffy vs Eskimo is personal preference imo, guys have had good or bad luck with both brands. I have used both and they are both good in my eyes. The propane augers and the ion's are good too.
I prefer a propane or ion if you use a suv/car as your main vehicle. Gas will leak and will make your car stink. I also prefer either of these for drilling inside a tent/shack, a gas motor will smoke you out.
I prefer gas or propane if you do lots of multi day trips or usually drill a ton of holes. Gas if you live up in Fort Mcmurray or north where it is often colder then here.
For propane I like the Jiffy for 8 in holes but the Eskimo for 10 in since it has lower gearing and more torque.
For Eskimo gas augers I prefer at least the 43 cc for 8in and the 51 cc for 10 in.
|
I picked up one of these 43 cc Eskimos on sale for $349. I am no expert, but it zips through 24" of ice pretty darn quick. More power is always good, but this one really does get the job done very well.
|
02-02-2017, 09:43 AM
|
|
|
|
Join Date: Jan 2010
Location: Edmonton
Posts: 6,470
|
|
Quote:
Originally Posted by RavYak
Both Jiffy and Eskimo offer 5 year warranty now. Jiffy vs Eskimo is personal preference imo, guys have had good or bad luck with both brands. I have used both and they are both good in my eyes. The propane augers and the ion's are good too.
I prefer a propane or ion if you use a suv/car as your main vehicle. Gas will leak and will make your car stink. I also prefer either of these for drilling inside a tent/shack, a gas motor will smoke you out.
I prefer gas or propane if you do lots of multi day trips or usually drill a ton of holes. Gas if you live up in Fort Mcmurray or north where it is often colder then here.
For propane I like the Jiffy for 8 in holes but the Eskimo for 10 in since it has lower gearing and more torque.
For Eskimo gas augers I prefer at least the 43 cc for 8 in and the 51 cc for 10 in.
|
I have the eskimo M43, came with a 8" and I recently updated it to a 10". Lots of power for the 10". Have had it for well over 5 years now and no problems other than me breaking the thumb throttle lever twice. LOL. Always starts within 2 pulls if primed and choked. I have seen them offer the M43 new with the 10".
What ever you get, buy a 10" Great to look through a picture window and pulling a larger fish other than perch up through the hole. Much easier to ice a fish and less fish lost at the hole.
__________________
Kim
Gonna get me a 16" perch.
|
02-02-2017, 01:04 PM
|
|
|
|
Join Date: May 2012
Location: Alberta
Posts: 2,449
|
|
Pretty happy with my 51cc 10in Eskimo. They go on sale fairly regularly.
|
02-02-2017, 01:43 PM
|
|
|
Join Date: Jan 2010
Posts: 587
|
|
Ive had my 10 inch Jiffy 3500 series proII for 7-8 years now, and it's junk. I battle through the hard water season with it, but its far from an enjoyable experience. If i were to replace this auger tomorrow, it would be with the 71cc Eskimo.
|
02-02-2017, 06:37 PM
|
|
|
|
Join Date: Jul 2011
Location: West Edmonton
Posts: 5,174
|
|
Quote:
Originally Posted by Kim473
What ever you get, buy a 10" Great to look through a picture window and pulling a larger fish other than perch up through the hole. Much easier to ice a fish and less fish lost at the hole.
|
I prefer an 8 inch hole 99% of the time. I only want a 10 inch if going for 20 lb pike/lakers. Sight fishing they are kind of nice too but if I really want I just drill 2-4 holes together with my 8 inch and that solves that.
I don't like the 10 inch augers for normal use because they are so much heavier, slower tougher drilling and too easy to drop things into or accidentally step into.
|
02-02-2017, 06:41 PM
|
Banned
|
|
Join Date: Dec 2012
Posts: 928
|
|
I'm with you ravyak. I ran 10 inch for a few years and went back to 8. I've stepped in my own hole to many times. Hole cover tip ups don't fit. It's harder on the body drilling 40 10 inch holes. Nor much benefit to them in my mind.
|
02-02-2017, 06:45 PM
|
|
|
|
Join Date: Nov 2010
Location: Edmonton
Posts: 2,499
|
|
I have the Eskimo Z51 Shark 10"
Love it. Had it for 5 years now and finally changed the spark plug and blades. I did crack the fuel tank late last year so I had to replace that this fall. Easy fix and $65.
I like the 10" because it's not that heavy, maybe I'm just stronger because I don't have an office job, it's not heavy and I'm never carrying it across a lake. No need to own an 8" and a 10". Just go as big as you can afford.
A couple outtings ago my buddy was drilling holes with it and it snapped a weld on the blade mount. Buddy took it to our local warranty depot and after a bit of a wait since the lady at Eskimo was sick, we have a new 10" flight on its way free of charge.
Great warranty and she fires up easy all the time. I do recommend good oil, I run Opti2 only in all my 2 strokes.
|
02-03-2017, 07:55 AM
|
|
|
|
Join Date: Jan 2010
Location: Edmonton
Posts: 6,470
|
|
Quote:
Originally Posted by RavYak
I prefer an 8 inch hole 99% of the time. I only want a 10 inch if going for 20 lb pike/lakers. Sight fishing they are kind of nice too but if I really want I just drill 2-4 holes together with my 8 inch and that solves that.
I don't like the 10 inch augers for normal use because they are so much heavier, slower tougher drilling and too easy to drop things into or accidentally step into.
|
8" to 10" upgrade increased the weight by maybe 1/2 a lb at most. Same head with my upgrade so speed did not slow down. Just made it a little harder to hold on to it.
__________________
Kim
Gonna get me a 16" perch.
|
02-02-2017, 06:07 AM
|
|
|
|
Join Date: Aug 2010
Location: Edmonton
Posts: 2,804
|
|
I have a Strikemaster now. If it ever died (it's 20 years old and still runs strong) I would replace it with an Ion or possibly a K-drill. Lighter, no gas, no fumes, quieter, and less pollution.
SS
Sent from my iPhone using Tapatalk
__________________
Princecraft, Humminbird, MinnKota, Cannon, Mack's Lure, & Railblaza Pro Staff
YouTube: Harder Outdoors
Instagram: @harderoutdoors
FB: HarderOutdoors
|
02-02-2017, 09:24 AM
|
|
|
Join Date: Apr 2012
Location: Edmonton
Posts: 8,387
|
|
I too am looking for a new auger. Anyone try the Eskimo HC40? The cutting technology seems like a great idea.
BW
|
02-02-2017, 02:48 PM
|
|
|
Join Date: Jan 2010
Location: Lloydminster
Posts: 1,539
|
|
Quote:
Originally Posted by Bigwoodsman
I too am looking for a new auger. Anyone try the Eskimo HC40? The cutting technology seems like a great idea.
BW
|
I just bought a new HC40 10" propane. It works some nice.
I really like carrying 1lb propane bottles over gas jugs
|
02-02-2017, 03:53 PM
|
|
|
Join Date: Sep 2009
Posts: 752
|
|
I don't own one but ive been on the ice with a couple buddies that had the ION and that thing is top notch. no sound, no gas, no fumes, no mixing gas, super light, no scooping holes out(reverse lets u send the slush the other way) On the other hand my little 8" stingray just wont die so I cant justify getting an ION just yet. I have had to replace a lot of stuff on it but that is all because the gas eats the gas line, gas tank, primer bulb. all were not expensive but would not need to be replaced had I had the ION
|
02-02-2017, 04:25 PM
|
|
|
Join Date: Nov 2014
Posts: 14
|
|
Just got a strike master honda lite. Starts first pull. Has lots of torque and cuts like a bugger and is much quieter, lighter and better on fuel the old jiffy 2hp auger I had and no mixing gas required either. Only a 2 year warranty on the engine though.
|
02-02-2017, 04:45 PM
|
|
|
Join Date: Jan 2017
Posts: 4
|
|
I would recommend ION. It is worth the money, and you won't regret. One charge can give you 20 holes on 2' ice. It is quiet, light, maintenance-free, and environment-friendly.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 01:35 PM.
|