Go Back   Alberta Outdoorsmen Forum > Main Category > Hunting Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 09-15-2017, 04:00 PM
Powder monkey Powder monkey is offline
 
Join Date: Feb 2014
Location: Saskatchewan
Posts: 178
Default Willow blind pictures

Hi guys
I've been out of waterfowling for a few years. I would like to build a willow blind out of some snow fence I have.probably just big enough for my son and myself.Before anyone says just buy a layout blind,I know they work we've used them and shot a lot of birds but they just aren't too comfortable imo. Any pictures or help would be appreciated.
Reply With Quote
  #2  
Old 09-15-2017, 04:21 PM
pgavey pgavey is offline
 
Join Date: Oct 2009
Location: Beaver Mines AB.
Posts: 879
Default

I had one from chicken wire about 12 ft long. Just thread in straw and bull rushes. pound in 4 stakes and wrap it around. When finished just roll it up.
I used mine for years, worked great.
Reply With Quote
  #3  
Old 09-15-2017, 04:36 PM
MK2750's Avatar
MK2750 MK2750 is offline
 
Join Date: Mar 2008
Location: Sylvan Lake
Posts: 3,411
Default

Some farmers don't like the chance of weeds on their fields so straight willows is what I used for years with lots of success. People are going back to them down south on some forums I read. They claim geese and ducks are looking for layout blinds and any inconsistency in the land makes them flare more than the old fashioned willow blind.

Back east if you tried to make a green blind that blended in with the living vegetation you would get skunked more often than not. Build a blind out of black dried eel grass and it stuck out like a sore thumb and birds were not bothered in the least.
Reply With Quote
  #4  
Old 09-15-2017, 04:38 PM
Coiloil37's Avatar
Coiloil37 Coiloil37 is offline
 
Join Date: Aug 2009
Location: Oz
Posts: 2,117
Default

I haven't got pictures but they're pretty straight forward. Some chicken wire, rebar stakes and cattail/ willows to fill. They work great, especially with little kids compared to a lay down blind.
Reply With Quote
  #5  
Old 09-15-2017, 04:49 PM
Dick284's Avatar
Dick284 Dick284 is online now
 
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,586
Default

We use a bale blind as our frame.

http://www.cabelas.ca/product/68997/...hayhouse-blind

This a panorama shot of our first shoot of the season. I see there's a few blocks yet to set to the right of the blind.

__________________


There are no absolutes
Reply With Quote
  #6  
Old 09-15-2017, 05:10 PM
Tfng Tfng is offline
 
Join Date: Nov 2014
Posts: 2,046
Default

I've used 6 inch concrete mesh. Chicken wire seems to me like it would be more hassle weaving the willow into it.

Don't make it too wide. A bungee cord across the top in the middle will help pull it together making it harder to see down into the blind.

I've shot plenty of birds out of a willow blind. Much more comfortable and I shoot much better I find.

Good luck!
Reply With Quote
  #7  
Old 09-15-2017, 05:14 PM
The Flint&Fly Guy's Avatar
The Flint&Fly Guy The Flint&Fly Guy is offline
 
Join Date: Mar 2015
Location: Slave Lake AB
Posts: 691
Default

Been field hunting waterfowl for a few years now, and willow blinds are all I e ever used
Reply With Quote
  #8  
Old 09-15-2017, 09:24 PM
bobalong bobalong is offline
Banned
 
Join Date: May 2007
Posts: 4,130
Default

I went back to a willow blind a few years ago when I got a trailer. Setup is about 5 minutes now. Main blind is six feet long, holds 3 adults easily. I also have an add on "L" blind for each end, so it can hold 5 easily if need be. Much easier to see, and the old knees like it better to.
Reply With Quote
  #9  
Old 09-15-2017, 09:35 PM
Dick284's Avatar
Dick284 Dick284 is online now
 
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,586
Default

Quote:
Originally Posted by bobalong View Post
Much easier to see, and the old knees like it better to.
Way easier on old cranky backs, necks and elbows too.
__________________


There are no absolutes
Reply With Quote
  #10  
Old 09-15-2017, 10:11 PM
Justfishin73's Avatar
Justfishin73 Justfishin73 is offline
 
Join Date: Oct 2016
Location: Edmonton area
Posts: 1,467
Default

Quote:
Originally Posted by Dick284 View Post
Way easier on old cranky backs, necks and elbows too.
Yup. Took my layout back. Hay bale blind much better
Reply With Quote
  #11  
Old 09-15-2017, 11:07 PM
Gifted Intuitive Gifted Intuitive is offline
Banned
 
Join Date: May 2012
Posts: 420
Default Blind Frames

I have used hog panels and cut them to a desired length. Easy to attach branches and grass. They can be used for garden peas during the off season.

I have also found 4 X 4 panels ( gates) at the businesses that provide metal fence.
Reply With Quote
  #12  
Old 09-16-2017, 12:24 AM
Drewski Canuck Drewski Canuck is offline
 
Join Date: May 2007
Posts: 3,922
Default Square metal bar stock with burlap

Been years since I used to do field shoots, a lot of miles and door pounding as opposed to water which is much easier, but in the day...

Using 1/2 square bar stock, 5 foot verticals. Tack a round pipe 3/4 "ID on both sides near the top of the sold bar stock.

Take 1/4 round bar and make it the length of the distance post to post. The horizontal bent at an L drop into the receivers on the vertical post. Take Burlap and lay it out, and wire it to the vertical posts. You are looking for 4 foot burlap for the blind, which is not easy to find any more.

Take stove wire and make a loop and push through the top of the burlap. This keeps the burlap taught to the frame Take some brown, black, and green paint and paint on verticals and angle stripes on the burlap to break up the burlap.

In the field, just pound in the vertical post and spread out the burlap, put on the horizontal bar, and drape the burlap tight to the horizontal bar supported between the two vertical bars.

The final evolution of this blind had three front vertical posts with 3 foot spacing, two side panels but 4 feet horizontal, and two long rear panels that overlapped so you could not see into the blind from the back.

Late season the problem with willow is getting them into the hard ground.

Best approach was again 1/2 " solid bar cut to a point 18 inches long, and the other end a section of 4 " pipe welded on to the solid bar. Ram the 1/2 " bar into the ground, and have the bar about 1 foot out of the ground. Stuff the pipe with willows. You need about 6 of these on the front and 6 in the back to support the willows in front and in back of the blind, but the willows will stand upright nicely in the bracket, where trying and stuffing sharp willow ends in in the hard ground will just make you cry.

Drewski
Reply With Quote
  #13  
Old 09-16-2017, 09:28 PM
Powder monkey Powder monkey is offline
 
Join Date: Feb 2014
Location: Saskatchewan
Posts: 178
Default

Thanks fellas
And gals
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:51 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.