|
|
12-14-2023, 06:34 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
.22 Hornet Conundrum - need help
Hello friends,
I'm facing a conundrum. I have the opportunity to purchase a beautiful 1st generation Browning A-Bolt Medallion in .22Hornet.
The problem is, the magazine is missing.
Where on this earth would I find a magazine?
I've done quite a bit of online searching - but have come only met dead ends.
How sad, that such a beautiful rifle is now [for all intents and purposes] useless because of the unavailability of a simple box-magazine.
Any tips would be greatly appreciated!
Rod
|
12-14-2023, 06:49 PM
|
|
|
|
Join Date: Apr 2008
Location: alberta
Posts: 2,042
|
|
western gun parts Edmonton
get a part number before you call them
|
12-14-2023, 07:45 PM
|
|
|
Join Date: Dec 2008
Posts: 2,677
|
|
If you can get it cheap but it.
I bought a Brno ZKW 465 cheap and shot it for years as a single shot until I found a clip.
I made a block to fit the mag hole so I could drop a cartridge in.
Eventually you will find a clip.
__________________
Thank you front line workers and volunteers
|
12-14-2023, 08:04 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 46,125
|
|
That is going to be a tough one to find, discontinued, and it never was common. It is unfortunate that people don't store the magazines in the firearms.
__________________
Only accurate guns are interesting.
|
12-14-2023, 08:52 PM
|
AO Sponsor
|
|
Join Date: Mar 2016
Posts: 1,805
|
|
|
12-14-2023, 09:14 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
Quote:
Originally Posted by Prophet River
|
That rifle I'm looking at is exactly like that!
|
12-14-2023, 09:35 PM
|
|
|
|
Join Date: Dec 2012
Location: AB
Posts: 842
|
|
Honest question. Would 3D printing be a viable option? Maybe not for a complete, but certain portions?
OP, I happen to have the same rifle. I have three mags. Two functional and one is not. A piece of the internals snapped. Tried repairing with epoxy. It held for a few years but let go again and I have not attempted to repair again. If we could figure out a way to produce this component of the magazine, I could probably help you out and sell you a magazine. My only condition would be, that if you ever choose to sell that rifle, I get first crack at purchase. They are absolute gems. It’s a sin to have it sit in its current state as such. I’ve been looking for mags for these at every show and store visited for at least a decade and have yet to see, or hear of one.
|
12-14-2023, 09:46 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
Quote:
Originally Posted by Big Lou
Honest question. Would 3D printing be a viable option? Maybe not for a complete, but certain portions?
OP, I happen to have the same rifle. I have three mags. Two functional and one is not. A piece of the internals snapped. Tried repairing with epoxy. It held for a few years but let go again and I have not attempted to repair again. If we could figure out a way to produce this component of the magazine, I could probably help you out and sell you a magazine. My only condition would be, that if you ever choose to sell that rifle, I get first crack at purchase. They are absolute gems. It’s a sin to have it sit in its current state as such. I’ve been looking for mags for these at every show and store visited for at least a decade and have yet to see, or hear of one.
|
Well that is a mighty fine offer sir. It's this sort of opportunity that might just be the decision-maker! Part of me is saying, "Buy it" - another part of me is saying, "Don't, because I may never find a magazine." I will speak with the seller tomorrow, and if it's OK with you, I may be in touch.
Thank you!
|
12-14-2023, 09:49 PM
|
Moderator
|
|
Join Date: Aug 2012
Location: Wheatland County
Posts: 5,823
|
|
Quote:
Originally Posted by Prophet River
|
And they want a fortune. That be an expensive gun by the time a guy could get it to Lloyd. Thanks for sleuthing that one out!
__________________
If you're not a Liberal when you're young, you have no heart. If you're not a Conservative when you're old, you have no brain. Winston Churchill
All tyranny needs to gain a foothold is for people of good conscience to remain silent. Edmund Burke
|
12-14-2023, 09:51 PM
|
|
|
Join Date: Jul 2017
Posts: 4,099
|
|
This one is used and pricy (about $165 Canadian) and is in New Zealand, so make friends with Coiloil so he can buy it and bring it for you next time he visits Alberta.
https://www.guncity.com/second-hand-...-rounds-385070
|
12-14-2023, 10:04 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
Quote:
Originally Posted by fishnguy
|
Man that's a simple looking little component! I think I could almost make one myself!
|
12-15-2023, 07:43 AM
|
|
|
Join Date: Jan 2008
Posts: 4,397
|
|
Numrich
Doesn't have them ?
|
12-15-2023, 11:06 AM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,644
|
|
Buy the gun, you will eventually find a mag and if not, they work great as single shots. They are a fantastically accurate 22 Hornet. I had one that would put 5 under an inch at 200 yards very regularly, and they are pretty on top of that.
Target squares are 1/2" on a side, not the typical 1".
|
12-15-2023, 02:16 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
Hey Big Lou...
Quote:
Originally Posted by Big Lou
Honest question. Would 3D printing be a viable option? Maybe not for a complete, but certain portions?
OP, I happen to have the same rifle. I have three mags. Two functional and one is not. A piece of the internals snapped. Tried repairing with epoxy. It held for a few years but let go again and I have not attempted to repair again. If we could figure out a way to produce this component of the magazine, I could probably help you out and sell you a magazine. My only condition would be, that if you ever choose to sell that rifle, I get first crack at purchase. They are absolute gems. It’s a sin to have it sit in its current state as such. I’ve been looking for mags for these at every show and store visited for at least a decade and have yet to see, or hear of one.
|
Hey Big Lou - I sent you a Private Message - not sure if it went through though. I can't find it now in my "sent items"
|
12-15-2023, 06:29 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
Quote:
Originally Posted by Dean2
Buy the gun, you will eventually find a mag and if not, they work great as single shots. They are a fantastically accurate 22 Hornet. I had one that would put 5 under an inch at 200 yards very regularly, and they are pretty on top of that.
Target squares are 1/2" on a side, not the typical 1".
|
That's fantastic!
|
12-15-2023, 06:50 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 46,125
|
|
Quote:
Originally Posted by Prophet River
|
For that price, I would just buy an Anschutz in 22Hornet. My 1730HB was a solid 1/2moa for 5 shots rifle. Corlanes has a very nice Anschutz 22Hornet on consignment.
__________________
Only accurate guns are interesting.
Last edited by elkhunter11; 12-15-2023 at 07:12 PM.
|
12-16-2023, 11:33 AM
|
|
|
Join Date: Oct 2010
Location: Near Drumheller
Posts: 6,991
|
|
This guy may possibly build them for you, if you can beg/borrow a sample he can work with, https://mag3d.ca/product-category/browning/ . May be worth a call or E-mail, never know what he may have for info, or what is needed to make one, no cost to inquiring.
__________________
You should also be a member;
CCFR
CSSA
|
12-16-2023, 01:49 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
Quote:
Originally Posted by 32-40win
This guy may possibly build them for you, if you can beg/borrow a sample he can work with, https://mag3d.ca/product-category/browning/ . May be worth a call or E-mail, never know what he may have for info, or what is needed to make one, no cost to inquiring.
|
Thanks for this!
Every other lead so far has petered out unfortunately.
|
12-22-2023, 03:22 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
*update*
Well, so far all leads have petered out. The only place I found one was in a gunshop in Christchurch, New Zealand. Export regulations from the New Zealand end make it impossible to get it here.
|
12-22-2023, 05:07 PM
|
|
|
Join Date: Jul 2017
Posts: 4,099
|
|
Quote:
Originally Posted by Artist
Well, so far all leads have petered out. The only place I found one was in a gunshop in Christchurch, New Zealand. Export regulations from the New Zealand end make it impossible to get it here.
|
That sucks. But like I said in my post with the link, ask Coiloil (member here). He is in New Zealand and might know and be able to do something. It is a rather expensive magazine though.
|
12-22-2023, 06:13 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
Quote:
Originally Posted by fishnguy
That sucks. But like I said in my post with the link, ask Coiloil (member here). He is in New Zealand and might know and be able to do something. It is a rather expensive magazine though.
|
Thank you!
|
12-22-2023, 06:17 PM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,644
|
|
Buy the gun. Whether you ever find a mag or mot you will be very happy shooting it as a single shot. If not, pm please me as I would be happy to have another.
|
12-22-2023, 06:37 PM
|
|
|
Join Date: Jul 2017
Posts: 4,099
|
|
Quote:
Originally Posted by Artist
Thank you!
|
Coiloil37, to be exact.
|
12-22-2023, 08:01 PM
|
|
|
Join Date: Dec 2009
Location: Fort Mc Murray/ Bell Block New Zealand.
Posts: 867
|
|
I can get the mag for you, If you buy the rifle, I will order it to my self and next time in NZ will bring it back, Most likely April/May
Give me a message, if you buy the rifle, we will work it out.
|
12-22-2023, 08:42 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
Quote:
Originally Posted by southernman
I can get the mag for you, If you buy the rifle, I will order it to my self and next time in NZ will bring it back, Most likely April/May
Give me a message, if you buy the rifle, we will work it out.
|
I will be in touch sir!!
Thank you!
|
12-22-2023, 08:54 PM
|
Moderator
|
|
Join Date: Aug 2012
Location: Wheatland County
Posts: 5,823
|
|
Quote:
Originally Posted by Artist
That rifle I'm looking at is exactly like that!
|
Is the A-bolt you're looking at in that good a shape?
__________________
If you're not a Liberal when you're young, you have no heart. If you're not a Conservative when you're old, you have no brain. Winston Churchill
All tyranny needs to gain a foothold is for people of good conscience to remain silent. Edmund Burke
|
12-22-2023, 10:11 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,086
|
|
Quote:
Originally Posted by roper1
Is the A-bolt you're looking at in that good a shape?
|
Yes, I believe it is.
It's an A-Bolt Micro Medallion. From what I understand, a somewhat rare rifle in .22 Hornet.
|
12-22-2023, 10:22 PM
|
Moderator
|
|
Join Date: Aug 2012
Location: Wheatland County
Posts: 5,823
|
|
Quote:
Originally Posted by Artist
Yes, I believe it is.
It's an A-Bolt Micro Medallion. From what I understand, a somewhat rare rifle in .22 Hornet.
|
Beauty little rifle. Enjoy!
__________________
If you're not a Liberal when you're young, you have no heart. If you're not a Conservative when you're old, you have no brain. Winston Churchill
All tyranny needs to gain a foothold is for people of good conscience to remain silent. Edmund Burke
|
12-23-2023, 08:04 AM
|
|
|
|
Join Date: Oct 2017
Location: Calgary-Red Deer area
Posts: 3,438
|
|
Did you buy it yet?
Sent from my SM-S901W using Tapatalk
__________________
I'm not really a licensed bodyman or heavy duty mechanic. I just play one at work.
|
12-23-2023, 09:20 AM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 46,125
|
|
Quote:
Originally Posted by roper1
Beauty little rifle. Enjoy!
|
That 22Hornet that you just purchased is a beauty of a rifle. Let us know how it shoots.
__________________
Only accurate guns are interesting.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 08:33 PM.
|