Best Anchor Type for the NSR?

[ehrgeiz]

For those with some experience boating on the NSR (particularly around Edmonton and Ft. Sask), just wondering if there is a consensus for the best anchor type/ setup?

I've seen the following style of anchor on some jet boats running the NSR:


Here is another river anchor that seems popular (the arms bend to avoid getting stuck and also gives you the option of changing the angle when pulling up:


I see the drift boat guys seem to like the pyramid type.



I've seen some hype on a product called the tornado anchor system. A bit pricey, but I'm sure a guy could easily fabricate one.



The boat it's to be attached to is a 14' inflatable.

Any advice or experience is welcome!

[mlee]

For an inflatable you won't need much. A standard 7lb anchor would hold my 390 sib no problem. I've literally seen guys use a cinder block.

[ehrgeiz]

Originally Posted by mlee

For an inflatable you won't need much. A standard 7lb anchor would hold my 390 sib no problem. I've literally seen guys use a cinder block.

Interesting. Thanks for the input. I've got a 420 and always assumed with it sitting on the water a guy might need a heavier anchor, especially if a big gust of wind hits. Obviously not intending to anchor in fast water, but on the outside of a run or eddy.

[dodgeboy1979]

for a small boat just go with a danforth style anchor. use a bit of chain as ballast to keep the anchor down until it sets and you should be good to go.

https://danforthanchors.com/

[Sundancefisher]

Lots of muddy bottom and some rocky areas.

I found the biggest concern up there was any place in town near bridges and culverts could have debris that can snag an anchor good.

[-JR-]

I guess having a knife in the boat is a good idea ,if you can't pull the anchor up