|
10-21-2020, 12:12 PM
|
|
|
Join Date: May 2009
Location: High River
Posts: 441
|
|
Need a new knot
Hello all. For years I've been using the improved cinch knot with no complaints. This fall I lost a couple of Rapala dt16's and in both cases it was my knot that failed. In fact both times my rod hadn't even loaded yet so I'm thinking the knot must have slipped prior to my last cast. I'm using stren magna thin 12lb line. Anyone have a better knot recommendation? Much thanks. Rick.
|
10-21-2020, 12:20 PM
|
|
|
|
Join Date: May 2007
Location: WMU 303
Posts: 8,537
|
|
Palomar
|
10-21-2020, 12:35 PM
|
|
|
|
Join Date: Jun 2017
Location: Calgary
Posts: 115
|
|
One and done. Palomar.
|
10-21-2020, 12:56 PM
|
|
|
Join Date: Jan 2018
Location: Wainwright
Posts: 636
|
|
I'm a uni knot guy....use it for almost everything. Palomar is a great choice too though.
|
10-21-2020, 01:03 PM
|
|
|
|
Join Date: May 2011
Location: Edmonton Alberta
Posts: 1,886
|
|
I do Palomar on most knots.
|
10-21-2020, 04:06 PM
|
|
|
Join Date: Apr 2009
Location: Southern Alberta
Posts: 7,351
|
|
Quote:
Originally Posted by CNP
Palomar
|
x2 on palomar
__________________
.
eat a snickers
made in Alberta__ born n raised.
FS-Tinfool hats by the roll.
|
10-21-2020, 05:50 PM
|
|
|
|
Join Date: Jan 2008
Location: Calgary
Posts: 940
|
|
Palomar wins hands down. Simple easy strong knot
|
10-21-2020, 08:48 PM
|
|
|
Join Date: Jun 2009
Location: Dodge City
Posts: 1,283
|
|
Palomar is a great knot but...
I can't help but think there is something going on with your line. For mono and flourocarbon the improved clinch, trilene, fishermans knot or whatever you wan't to call it is strong. You should have close to if not 100% line strength.
Not here to argue which one is stronger just saying that I'd be looking closely at my line. Is it old? (I think mono or flouro should be changed yearly at the least). Does it have any damage from abrasion due to fishing conditions or damaged guide/guides, maybe the knot strength isn't great with that particular line etc...
|
10-21-2020, 10:53 PM
|
|
|
Join Date: Nov 2007
Posts: 1,327
|
|
Sounds like you need new line. If you are breaking off 12lb like it's 4 lb then there is something wrong.
|
10-22-2020, 12:02 AM
|
|
|
Join Date: May 2009
Location: High River
Posts: 441
|
|
Thanks for all the replies. The Palomar looks easy enough for me to learn. My line was less than six weeks old but who knows how long ago it was made. I don't think the line broke, more like it the knot slipped. I will have a close look to see if it's in rough condition and I'll have a look at my rod guides as well. One thing worth mentioning perhaps is these Rapala dt16 baits do put a fair strain on my rod when trolling them. I've not had problems with other baits except for the odd hard snag which caused line brake. Thanks.
|
10-22-2020, 08:08 AM
|
|
|
Join Date: Nov 2012
Location: Yellowhead County
Posts: 65
|
|
Try a double clinch also known as the trilene knot
|
10-22-2020, 11:39 AM
|
|
|
|
Join Date: Jan 2009
Location: Turner Valley, AB
Posts: 325
|
|
I typically use Palomar for braid and trilene for mono.
If you looking to learn knots, the below link is a great resource.
https://www.animatedknots.com/fishing-knots
__________________
Many men go fishing all of their lives without knowing that it is not fish they are after - Henry David Thoreau
|
10-22-2020, 11:54 AM
|
|
|
|
Join Date: Nov 2014
Location: Edmonton
Posts: 1,520
|
|
Fishin fool knot is the way to go. It’s a little less popular, but it’s the bomb.
__________________
|
10-22-2020, 12:19 PM
|
|
|
|
Join Date: Nov 2012
Location: Alberta
Posts: 243
|
|
The knot you are currently tying shouldn't cause any issues with the type of line on your reel.
The type of knot you tie is irrelevant if your line has degraded.
|
10-22-2020, 08:38 PM
|
|
|
|
Join Date: Jul 2010
Location: Edmonton
Posts: 11,935
|
|
Quote:
Originally Posted by ab_hunter
The knot you are currently tying shouldn't cause any issues with the type of line on your reel.
The type of knot you tie is irrelevant if your line has degraded.
|
Kind of what I was thinking.
If you have properly tied a clinch knot, the chances of failure are very very low.
Change out your line.
|
10-24-2020, 02:04 PM
|
|
|
Join Date: Dec 2010
Location: Edmonton
Posts: 29
|
|
Quote:
Originally Posted by Rick.
Hello all. For years I've been using the improved cinch knot with no complaints. This fall I lost a couple of Rapala dt16's and in both cases it was my knot that failed. In fact both times my rod hadn't even loaded yet so I'm thinking the knot must have slipped prior to my last cast. I'm using stren magna thin 12lb line. Anyone have a better knot recommendation? Much thanks. Rick.
|
I personally prefer the snell knot. i will snell all my hooks....
|
10-24-2020, 02:13 PM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,658
|
|
Snell is a good knot but doesn't work well on Plugs. Polymar knot would be my suggestion. Works for mono and braided lines, is very strong and will not slip. Very easy to tie, even with cold or stiff fingers.
How to tie one illustrated.
https://www.animatedknots.com/palomar-knot
|
10-24-2020, 03:39 PM
|
|
|
|
Join Date: Sep 2016
Posts: 80
|
|
No matter what knot you use, ALWAYS test it after tying. Give it a good pull with even pressure. Don’t jerk it.
|
10-24-2020, 04:47 PM
|
|
|
Join Date: Jun 2013
Posts: 1,469
|
|
double palomar or a triple granny
|
10-24-2020, 05:40 PM
|
|
|
|
Join Date: Jul 2010
Location: Edmonton
Posts: 11,935
|
|
I tested the double Palomar vs the standard Palomar on our tensile testing machine in the lab at work. I tested it with a few weights of braid and using fluorocarbon (2 heavier weights of fluorocarbon leader) and there was no difference in strength or knot failure through slipping OR breaking - as a matter of fact, the double had was slightly "less" resistant to breaking (although it would/could be statistically insignificant) based on the fact we did maybe a dozen pulls until I ran out of line to fill the fixture.
The improved clinch was better on fluoro by a fair margin, but the Palomar was the ticket for the braid although only slightly better.
In many cases the break was at the base of the knot but not always - there seemed to be no pattern.
And ....... interestingly ALL samples broke ABOVE the line rating in every case. So 14lb broke close to 20lbs in some cases.
I would have done more testing, but the guys had stuff they needed to do and didn't want them to have to explain what the heck they were doing on work time testing fishing line for me instead of doing their tests on materials they were supposed to be testing.... lol
You would probably need to do a little more of a population to have "sound" results and we should have used the optical comparator to make sure the thicknesses were uniformed throughout the samples and inspected them with a microscope and stuff - but I just peeled off 10-12 feet of line of whatever spools I had and brought them in to play with.
The other thing that was cool to see, braided line stretches, but hardly compared to fluoro - the fluoro had elongation prior to failure versus the braid just exploded upon failure which was loud and fun to watch - the 40lb braid was like a grenade going off - scared us every time .... lol
Last edited by EZM; 10-24-2020 at 05:49 PM.
|
10-24-2020, 10:57 PM
|
|
|
Join Date: Aug 2010
Posts: 260
|
|
I almost always use a palomar knot when spin fishing.
|
10-26-2020, 05:30 PM
|
|
|
|
Join Date: Mar 2008
Location: Calgary
Posts: 3,858
|
|
Quote:
Originally Posted by EZM
I tested the double Palomar vs the standard Palomar on our tensile testing machine in the lab at work. I tested it with a few weights of braid and using fluorocarbon (2 heavier weights of fluorocarbon leader) and there was no difference in strength or knot failure through slipping OR breaking - as a matter of fact, the double had was slightly "less" resistant to breaking (although it would/could be statistically insignificant) based on the fact we did maybe a dozen pulls until I ran out of line to fill the fixture.
The improved clinch was better on fluoro by a fair margin, but the Palomar was the ticket for the braid although only slightly better.
In many cases the break was at the base of the knot but not always - there seemed to be no pattern.
And ....... interestingly ALL samples broke ABOVE the line rating in every case. So 14lb broke close to 20lbs in some cases.
I would have done more testing, but the guys had stuff they needed to do and didn't want them to have to explain what the heck they were doing on work time testing fishing line for me instead of doing their tests on materials they were supposed to be testing.... lol
You would probably need to do a little more of a population to have "sound" results and we should have used the optical comparator to make sure the thicknesses were uniformed throughout the samples and inspected them with a microscope and stuff - but I just peeled off 10-12 feet of line of whatever spools I had and brought them in to play with.
The other thing that was cool to see, braided line stretches, but hardly compared to fluoro - the fluoro had elongation prior to failure versus the braid just exploded upon failure which was loud and fun to watch - the 40lb braid was like a grenade going off - scared us every time .... lol
|
Very cool.
__________________
IG: @gibsontilley
|
10-30-2020, 08:33 AM
|
|
|
Join Date: May 2009
Location: High River
Posts: 441
|
|
Thanks for all the responses. Finally went out nd checked things yesterday. Rod guides were fine but the line is not. Checked about fifty feet of line and it was in awful condition. I must of bought some very old/ or poorly made line. Rick.
|
10-30-2020, 09:53 AM
|
|
|
|
Join Date: Dec 2012
Location: At the end of the Thirsty Beaver Trail, Pinsky lake, Alberta.
Posts: 25,289
|
|
Quote:
Originally Posted by Dean2
Snell is a good knot but doesn't work well on Plugs. Polymar knot would be my suggestion. Works for mono and braided lines, is very strong and will not slip. Very easy to tie, even with cold or stiff fingers.
How to tie one illustrated.
https://www.animatedknots.com/palomar-knot
|
and with shaking hands that are viewed through old err correction aging eyes...
__________________
Be careful when you follow the masses, sometimes the "M" is silent...
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:12 PM.
|