|
05-11-2008, 07:26 AM
|
|
|
Join Date: Jun 2007
Posts: 14
|
|
old 30-06 accuracy
Hi, I recently bought a used 30-06 with a new scope. My first rifle for deer. I been shooting at a target at 100 yrds that it 6 by 6 inches. my groups are a little scattered, im using 150grn win superx they are cheapest to buy. I seem to hold steady enough, yet not really happy with groups. Any shooting tips would be great.
|
05-11-2008, 07:29 AM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,776
|
|
Clean it (get all signs of copper out) get it on the bench, with bags. Barring any resolution form those two items, hook up with someone like a fellow AO member who knows their stuff and get some hands on training, and tips.
BTW: where are you at?
__________________
There are no absolutes
|
05-11-2008, 07:48 AM
|
|
|
Join Date: May 2007
Posts: 71
|
|
Old 30-06
Follow Dicks instructions as per the cleaning and the rests. it is a possibility that your barrel may have some wear on it. I have a 30-06 Springfield x-millitary, it has button rifling instead of the normal groove (raised ridge instead of a machined groove) it does exactly the same with 150 gr. bullets, hard to get a good group, I found that it likes the beefier bullets 180-220 and is dead on every shot using these. These bullets seem to grip the barrel better. Let us know how you make out.
|
05-11-2008, 08:21 AM
|
|
|
Join Date: Sep 2007
Posts: 2,392
|
|
post a picture of your grouping, then we can critique it properly. And then give you the right advice.
|
05-11-2008, 08:45 AM
|
|
|
|
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
|
|
"New Scope". Make sure all your screws are good and tight.
Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
|
05-11-2008, 09:29 AM
|
|
|
|
Join Date: May 2007
Location: Calgary, Alberta
Posts: 557
|
|
My 30-06 hates the 150's.........try heavier bullets as previously suggested. You might be pleasantly surprised.
|
05-11-2008, 09:53 AM
|
|
|
|
Join Date: Mar 2008
Location: Sylvan Lake
Posts: 3,480
|
|
Quote:
Originally Posted by elnino54
My 30-06 hates the 150's.........try heavier bullets as previously suggested. You might be pleasantly surprised.
|
X2
|
05-11-2008, 10:21 AM
|
|
|
Join Date: Jun 2007
Posts: 14
|
|
Thank you for the advice, I will clean the gun and try 180grn next time out and try to post pics. Also i got somkinda brisle brush with the cleaning kit i purchased,Should i run this thing through the barrel or just use the pads???
Last edited by izzy; 05-11-2008 at 12:17 PM.
|
05-11-2008, 12:31 PM
|
|
|
|
Join Date: Nov 2007
Posts: 609
|
|
Put some bore solvent on that brush and run it up and down a few times, then I wrap a patch around the brush and push it through, then another, and sometimes another. Some time you have to scrub/brush with solvent a few times. Use a bore guide to keep the solvent and junk out of your action. I use butches bore shine. This is what I do anyways.
__________________
Eyes on the side ment to hide, Eyes in front ment to Hunt!!!
|
05-11-2008, 02:01 PM
|
|
Sounds like you need to sart from scratch to Some good advice here clean it good fisrt then check all the srews are tight even the base's and rings even if your not sure your local gunsmith can check it for you for a small $$$ i would also try a few diffrent brands of ammo it may cost a few extra $$$$ but well worth it in the long run Good luck .
|
05-11-2008, 03:59 PM
|
|
|
Join Date: Jan 2008
Posts: 4,397
|
|
Are you shooting off of a bench/picnic table with front and rear sandbags?I skip the sand and have #8 birdshot in mine It's damned solid.Wear muffs to save your ears and avoid developing a flinch.I don't know your experience level so it don't hurt ask.As others advised check to see all of your mts and ring screws are tight.Have someone you trust shoot it too.....It will work out...............Harold
|
05-11-2008, 07:20 PM
|
|
|
Join Date: Jun 2007
Posts: 14
|
|
This is my first rifle, But im a good shot with shotgun and compound bow. Confident my scope is adjusted and tight. Im shooting over the hood of my car for a rest with a heavy jackett for support. My shots are steady and feel good, Im hitting the target sometimes but not consistent grouping. I can group Arrows at 50yrds but not Bullits at 100. I will try the heavier 180grn.Be a couple of weeks before have chance to try them though.I will post results and pics if can figure out that @##??? camera.
|
05-11-2008, 08:04 PM
|
|
Quote:
Confident my scope is adjusted and tight. Im shooting over the hood of my car for a rest with a heavy jackett for support. My shots are steady and feel good, Im hitting the target sometimes but not consistent grouping.
|
Ok I understand a little more thanks."Confident my scope is adjusted and tight" It wouldnt hurt to Make sure 100% No guess work but hey if you are Confident enough .
|
05-11-2008, 08:23 PM
|
|
|
Join Date: May 2008
Posts: 1,501
|
|
the hood of the car is not a bench.... get to a sturdy bench and shoot from proper sand bags or rifle rest like a lead sled. let someone else shoot it as well.Try some different brands of ammo.... you will find one that works if your barrel isn't ruined. best of luck.
|
05-12-2008, 12:40 AM
|
|
|
Join Date: May 2007
Posts: 7,730
|
|
The hood of your car is not a benchmark for accuracy.....Nor is it legal.....
If you want good accuracy, you need to first learn how to SHOOT. This involves setting up a good rest, learning trigger control, breathing, etc
A rolled up jacket on the hood of a car aint gonna do much for accurate shooting.....
|
05-12-2008, 06:39 AM
|
|
|
Join Date: Jan 2008
Posts: 4,397
|
|
Shooting off a car/truck hood is like trying to split a diamond on a trampoline!Find a solid bench or pic-nic table and you'll get consistancy.......Harold
|
05-12-2008, 06:42 AM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,776
|
|
Quote:
Originally Posted by Rust
Put some bore solvent on that brush and run it up and down a few times, then I wrap a patch around the brush and push it through, then another, and sometimes another. Some time you have to scrub/brush with solvent a few times. Use a bore guide to keep the solvent and junk out of your action. I use butches bore shine. This is what I do anyways.
|
Err Uh, and what do you accomplish by this method?
The removal of copper(which left un checked will cause accuracy issues) with solvents like Butches, requires contact time with the bore. The copper is removed through a chemical reaction, not through abbrasive action. A bore brush is for removing carbon, and powder deposits!
And lastly a bore guide does indeed provides the convenince of keeping solvent out of the action and magazine well, but it's real purpose is to guide the cleaning rod into the bore so that the transistions in the chamber dimensions do not get damaged by the cleaning rod attacments.
If you are going to provide the Lad with some advice, at least make sure it is the correct advice, and not some sort of fault plagued system, which may cause him possible further greif down the road.
__________________
There are no absolutes
Last edited by Dick284; 05-12-2008 at 07:04 AM.
|
05-12-2008, 06:43 AM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,776
|
|
Izzy, where are you at?
__________________
There are no absolutes
|
05-12-2008, 07:31 AM
|
|
|
Join Date: Mar 2008
Posts: 1,822
|
|
Get off the hood of your car or any part of a vehicle.
|
05-12-2008, 05:37 PM
|
|
|
Join Date: Jun 2007
Posts: 14
|
|
Quote:
Originally Posted by Dick284
Izzy, where are you at?
|
Lethbridge
|
05-12-2008, 06:16 PM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,776
|
|
Send a PM to Rackmastr and ask for his help.
I sent you a PM yesterday, did you get it?
__________________
There are no absolutes
|
05-12-2008, 06:55 PM
|
|
|
Join Date: May 2007
Posts: 7,730
|
|
Ya you can toss me a PM if ya like Izzy....I'm from the area and could give you a hand if needed...
|
05-12-2008, 06:59 PM
|
|
|
Join Date: Jun 2007
Posts: 14
|
|
Quote:
Originally Posted by Dick284
Send a PM to Rackmastr and ask for his help.
I sent you a PM yesterday, did you get it?
|
Yes sir i sure did,Thanks for the cleaning tips.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:01 PM.
|