|
02-14-2019, 10:19 AM
|
|
|
Join Date: Jan 2013
Posts: 653
|
|
300 wm reloading.... starting point
Have just purchased my second set of dies. This time 300wm from user Ranets.
Will start reading the nosler reloading manual to find some good starting points but wanted to glean some experience with powders from you all....
What have you had success with?
Sent from my SM-G530W using Tapatalk
|
02-14-2019, 10:25 AM
|
|
|
Join Date: Sep 2009
Location: Lethbridge
Posts: 2,045
|
|
4831, imr 7828, h1000. 4831 for 180 grain bullets and below. The others for up to 230 grain.
__________________
"Unthinking respect for Authority is the greatest enemy of truth"
Albert Einstein
|
02-14-2019, 05:44 PM
|
|
|
Join Date: Jan 2013
Posts: 653
|
|
Quote:
Originally Posted by sikwhiskey
4831, imr 7828, h1000. 4831 for 180 grain bullets and below. The others for up to 230 grain.
|
Thanks!
Sent from my SM-G530W using Tapatalk
|
02-14-2019, 05:49 PM
|
|
|
Join Date: Jul 2011
Posts: 694
|
|
Reloader 19 with 168gr Barnes TSX
|
02-14-2019, 06:21 PM
|
|
|
Join Date: Dec 2011
Location: East Kootenays, BC
Posts: 1,188
|
|
Not sure what rifle you have but my Remington shoots its best with RL22 pushing Barnes 180 TSX or TTSX.
|
02-14-2019, 07:13 PM
|
|
|
Join Date: Dec 2011
Posts: 2,999
|
|
rl 22 with 180 accubonds around 2950 to 3000 fps,start low and work your way up.You can push them faster,but that's seem to b the sweet spot for me.
|
02-14-2019, 07:15 PM
|
|
|
Join Date: Sep 2015
Posts: 1,874
|
|
4350 with 165 gr
|
02-14-2019, 08:03 PM
|
|
|
|
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
|
|
Rl-22 for Hornady 212g eld-x and both berger 175g and 190g
|
02-14-2019, 08:19 PM
|
Banned
|
|
Join Date: Mar 2009
Posts: 5,700
|
|
If you don’t have a chrony it would be a good idea to get one
As nice as it is to see good groups at 100 yards consistent FPS is just as important
I’d use a know, temp stable powder which will give consistent results when you need it
|
02-14-2019, 10:50 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,430
|
|
RL 22 in the 30-06 is really temperature sensitive not sure about in the .300 but something to keep in mind.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
02-15-2019, 08:08 AM
|
|
|
Join Date: Jan 2019
Posts: 20
|
|
I use 4831 in pretty much every hunting caliber I load because I can use 4831 in pretty much every hunting caliber I load.
|
02-15-2019, 08:48 AM
|
|
|
Join Date: Jan 2013
Posts: 653
|
|
I wish there were sample bottles powder. Like 1/4 lb would be nice. Looks from the manual that I can start with h1000 the IMRs look good too. Thanks for the advice all.
Sent from my SM-G530W using Tapatalk
|
02-15-2019, 08:52 AM
|
|
|
Join Date: Jan 2013
Posts: 653
|
|
I do have a chrony. Will make up some loads with a couple of powders and see if I can find the node that works. Thx
Quote:
Originally Posted by marky_mark
If you don’t have a chrony it would be a good idea to get one
As nice as it is to see good groups at 100 yards consistent FPS is just as important
I’d use a know, temp stable powder which will give consistent results when you need it
|
Sent from my SM-G530W using Tapatalk
|
02-15-2019, 12:16 PM
|
|
|
Join Date: Dec 2009
Location: Fort Mc Murray/ Bell Block New Zealand.
Posts: 867
|
|
I use H4350 in my 300 win and 300. H&H.
4350 and 4831 either IMR or Hodgdon are very versatile powders,
The likes of reloader, 23,25, 26, retumbo etc, will perhap yield, a little more speed.
|
02-15-2019, 03:12 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,430
|
|
Just looking at your reloading manual (Nosler) RL 22 is 75 gr. of powder= more recoil as well. Can you tell I am not a big fan? IMR powders tend to give me the best results in most calibers.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
02-15-2019, 11:06 PM
|
|
|
Join Date: Dec 2011
Posts: 2,999
|
|
One powder I never tried is the hybrid 100 v ,i have a couple pounds ,but I guess I will have to try it in the future. I used viht powders for cold temps with good luck,165,160,560 ,565 I have ,but not used it yet.
The 300 win has a large powder group for reloading and sometimes you just got to try new stuff.That's the best part of reloading is finding what works best along with a great bullet selection for this cartridge.
Last edited by JD848; 02-15-2019 at 11:32 PM.
|
02-16-2019, 07:39 AM
|
|
|
Join Date: Nov 2015
Posts: 536
|
|
H1000, FED GM215M primers, Nosler brass and a 215 Berger. As recommended earlier I would stay far away from R22 it is to Temp sensitive. If going with the R powders look at R26 and R23. Personally I would go with a 200+gr bullet. Why use a 180gr in this big of a case? Save the 180's for 30-06's. Another powder guys are liking in the 300 Win Mag is N570. I haven't tried in mine but it is a great powder in other guns; expensive though.
|
02-16-2019, 10:54 AM
|
|
|
|
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
|
|
Quote:
Originally Posted by 6.5 shooter
RL 22 in the 30-06 is really temperature sensitive not sure about in the .300 but something to keep in mind.
|
Ive found it to be a non issue in two 300wm with rl22
I develop my loads in the summer and test all year my eldx load was developed in +20 weather and was just shooting it last week in -33 had .5 moa difference in impact at 600m
My 6.5x284 sitting beside it using h-4831 yeilded simular results
I use rl22 in my 300wm, 243win, 6.5x55 with out temp issues or at least any that would matter for my purposes
|
02-18-2019, 11:50 AM
|
|
|
|
Join Date: Oct 2007
Location: Cowtown, agian
Posts: 2,820
|
|
The two most accurate powders I have used in a 300 WM under 180s is H4350 and H1000. They gave good velocity and very consistent ES.
7828 and RL25 were also good with 200gr bullets.
__________________
The inherent vice of capitalism is the unequal sharing of blessings; the inherent virtue of socialism is the equal sharing of miseries.
- Sir Winston Churchill
A body of men holding themselves accountable to nobody ought not to be trusted by anybody.
-Thomas Paine
|
02-18-2019, 04:50 PM
|
|
|
|
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
|
|
Sorry, I just couldn't resist.
Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
|
02-18-2019, 05:48 PM
|
|
|
|
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
|
|
Quote:
Originally Posted by Grizzly Adams
Sorry, I just couldn't resist.
Grizz
|
That’s priceless lol
|
02-24-2019, 11:47 AM
|
|
Gone Hunting
|
|
Join Date: May 2007
Location: Calgary
Posts: 1,708
|
|
300 Win Mag 180 gr Barnes TTSX about 10 meters
Yes I hunt with 300 Win Mag
__________________
From Wikipedia
"No safe threshold for lead exposure has been discovered—that is, there is no known amount of lead that is too small to cause the body harm."
150 TTSX vs Goat-WOW
http://youtu.be/37JwmSOQ3pY
|
02-24-2019, 12:54 PM
|
|
|
Join Date: Sep 2008
Location: Parkland County, AB
Posts: 4,283
|
|
Quote:
Originally Posted by JD848
One powder I never tried is the hybrid 100 v ,i have a couple pounds ,but I guess I will have to try it in the future. I used viht powders for cold temps with good luck,165,160,560 ,565 I have ,but not used it yet.
The 300 win has a large powder group for reloading and sometimes you just got to try new stuff.That's the best part of reloading is finding what works best along with a great bullet selection for this cartridge.
|
HV-100 is one of the most efficient powders there is for the .300 WM. It's just a bit slower than H4350 and provides the lowest velocity spreads of any powders I have tried with that cartridge.It's also a great powder for the 6.5 Swede and 7mm RM. Temp stability is great as well. From O deg to 70 deg there is about 100 fps difference. Definately worth a try in your .300wm with bullets from 165 to 220 gr,
__________________
When applied by competent people with the right intent, common sense goes a long way.
|
02-25-2019, 09:18 AM
|
|
|
|
Join Date: May 2007
Posts: 3,175
|
|
RL-22 between 74-75grains with Federal 215gm primers and 180gr Accubonds have been my Sako m75ss medicine since I started reloading back in 2005.
WS 780 powder or H1000 would be others to try.
|
02-25-2019, 09:35 AM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,778
|
|
Most powders from the burn rate of 4350 to around H1000 or there about’s will work.
I intentionally have quit using Alliant powders as their availability suffers quite often, and what’s the point of using a powder or component that is missing from the shelves more than it is on the shelves. Also there is no place that regularity carries Alliant powders in bulk either.
__________________
There are no absolutes
|
02-26-2019, 01:06 AM
|
|
|
Join Date: Dec 2011
Posts: 2,999
|
|
Quote:
Originally Posted by Salavee
HV-100 is one of the most efficient powders there is for the .300 WM. It's just a bit slower than H4350 and provides the lowest velocity spreads of any powders I have tried with that cartridge.It's also a great powder for the 6.5 Swede and 7mm RM. Temp stability is great as well. From O deg to 70 deg there is about 100 fps difference. Definately worth a try in your .300wm with bullets from 165 to 220 gr,
|
Thanks Salavee ,I will give hv-100 a try in my 7mm rem plus the 6.5 and 300 win and see how it goes.I use to use H 1000 and started trying different powders,but the H 1000 was one of the better ones by far.
|
02-26-2019, 02:09 AM
|
|
|
Join Date: Aug 2008
Location: CNP
Posts: 3,793
|
|
I use 73.5 grs. of RL 22 with 180 accubonds for a chronoed avg. of 2844 fps. in a Sako A5. Groups the best out of a few different powders I tested.
__________________
You are what you do, not what you say.
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 07:15 PM.
|