Quote:
Originally Posted by russ
I have an old Wingmaster and the barrel has external surface rust. Can I powder coat the barrel rather than bluing it? If so, are there any precautions I need to be aware of?
|
Powder coating would work but a few things to be considered.
1. Paint has a high mil thickness on substrate. Finished thicness can be 1.75 mils to 3.5 mils.
2. Possible coating in inner parts.
3. High tempature coating needed because the barrel "may" get hot.
4. Best prep is sand or poly blasting for 100 percent adhesion.
5. Curing of the paint is 350 to 400 degrees @ 15 to 30 minutes.
6. Powder Paint should be "TGIC " ( polyuerthane )for best uv protection.
7. Small parts are hard to paint and may affect final assembly of the gun.
Recommendation that you take the gun to the supplier to get there opinion.
Cheers