|
05-17-2017, 07:35 AM
|
|
|
Join Date: Apr 2017
Posts: 7
|
|
Cracked SKS stock
Hey,
My SKS has a huge crack in the forestock, from the very end back about three inches. At its widest, it's about 2mm. Huge.
The last time I shot it, it shot really high, no doubt because of the crack.
I love the wood stock, but this is obviously a big issue. Any suggestions?
deChelca
|
05-17-2017, 07:40 AM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,658
|
|
Lotsa guys changing the wood out for that tacticool look, just put a WTB as in the buy and sell.
__________________
There are no absolutes
|
05-17-2017, 10:40 AM
|
Banned
|
|
Join Date: Jan 2010
Location: rollyview
Posts: 7,860
|
|
i bought a used sks for $150 i'm sure attempting to fix it or replace the stock would cost more or at least the same
|
05-17-2017, 11:34 AM
|
|
|
Join Date: Apr 2017
Posts: 7
|
|
Quote:
Originally Posted by fish_e_o
i bought a used sks for $150 i'm sure attempting to fix it or replace the stock would cost more or at least the same
|
I hadn't thought of that. Thanks very much!
I really love the wood,so switching to polymer is a disappointing solution.
|
05-17-2017, 12:07 PM
|
|
|
Join Date: Mar 2011
Location: Fox Creek
Posts: 3,370
|
|
Quote:
Originally Posted by deChelca
I hadn't thought of that. Thanks very much!
I really love the wood,so switching to polymer is a disappointing solution.
|
I think the plastic stocks for them are pretty flimsy. I would try gluing it back together. I think that far from the end shouldn't have too much effect on the overall shooting. I would probably try some bedding compound on it and clamping it together. And it being a big crack, I might groove or drill the wood slightly to give it more surface area to bond to. If you do the whole fore end it should end up being pretty sturdy.
For the price that the plastic stocks, I would probably end up getting a Boyds laminate wood stock, if yours ends up being unfixable. Or even modifying it somewhat.
A lot of military rifles end up shooting high. Get a sight adjustment tool for the front sight, if you don't have one already. That should fix you up.
__________________
Profanity and name calling are poor substitutes for education and logic.
Survivor of the dread covid
Pureblood!
|
05-17-2017, 04:28 PM
|
|
|
Join Date: Sep 2013
Location: Calgary
Posts: 1,081
|
|
Quote:
Originally Posted by deChelca
I hadn't thought of that. Thanks very much!
I really love the wood,so switching to polymer is a disappointing solution.
|
PM sent
__________________
Think about it ....every single corpse on Mt Everest...
Was a highly motivated person...
...stay lazy my friends
|
05-27-2017, 02:48 PM
|
|
|
Join Date: May 2017
Location: Killam, Alberta
Posts: 21
|
|
You can find an other stock at almost any gun show for about $20-$50.
That is what I would do for the most cost effective solution.
Belus
|
05-28-2017, 01:25 PM
|
|
|
|
Join Date: Aug 2011
Location: Ontario~looking west
Posts: 1,184
|
|
Quote:
Originally Posted by deChelca
Hey,
My SKS has a huge crack in the forestock, from the very end back about three inches. At its widest, it's about 2mm. Huge.
The last time I shot it, it shot really high, no doubt because of the crack.
I love the wood stock, but this is obviously a big issue. Any suggestions?
deChelca
|
^"forestock" as in the muzzle-end of the stock itself...or..the chunk of wood that is fitted over the gas tube? Either way, these are readily available parts...just check over on G nutz.
|
04-13-2018, 06:44 AM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,354
|
|
Quote:
Originally Posted by deChelca
Hey,
My SKS has a huge crack in the forestock, from the very end back about three inches. At its widest, it's about 2mm. Huge.
The last time I shot it, it shot really high, no doubt because of the crack.
I love the wood stock, but this is obviously a big issue. Any suggestions?
deChelca
|
This type of crack is very easy to fix and it will hold forever as there is little tension in that area. If you prefer not to a used SKS stock can easily be had for $30, the forearm parts about $10. CGN has at least 3 on there at any given time.
I would buy another SKS for a parts gun before I paid big money for what some of the aftermarket guys want price wise.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 03:25 PM.
|