Quote:
Originally Posted by Bush
teach me this trick
how do you aim with a coat hanger
|
remove suction cup mount. fully open coat hanger. -----------------.place center of wire parallel to the mounting area on the transducer head.put each end of the coat hanger in the mounting hole from different ends.pull thru. I use pliers to bend the wire in to a snug bend around the mount ----¥-----
once the mount is snug bend the coat hanger into the bend you feel is best for you on the ice.£_____}sorry my diagrams are crappy if you look at my last one 90° to the screen you will get the idea. I use a painted coat hanger but even baling wire will work fine just remember it will rust. if I ever come across stainless wire the coat hanger will be replaced. industrial insulation guys are the one to see they use miles if it.hope this helps pm in you need more info.