[Bonescreek]

Thanks Don, for all the help from you all over the years I'm happy to try
to give back when I can. :-)

Here's some pics. of the skins with trim applied, can start filling it with close
now.

Note spacing of the staples in the skins should be 1-2" apart, so I added more
after the picture was taken. The spacing of screws for the trim is fine at 12"
spacing.

The ThirdHand skins are stiff kind of like a thin cardboard and it makes it easier
to handle than the trex covers but is much harder to stretch to get wrinkles out.
Tip .. The target faces come cut exact 4' on 3 edges and about 4' 2" on 1 edge.
Align flush the top and side edges so long end can be pulled to stretch on the
bottom.

I have some creases in the front but the back came out smooth. Filling packing
the close should take out the wrinkles.
If not I'll take the front skin back off and re-stretch it.