Trigger failure
I have had trigger/safety issues on 2 rifles. A Sako Vixon when one of the roll pins which hold the trigger mechanism to the receiver partially worked its way out of its proper location.
Also a Winchester Ranger that if you depressed the trigger while the rifle was cocked with the safety on then released the safety the firing pin would fall...
All safeties / triggers are prone to failure due to the fact they are a mechanical device.
This is why one must always treat the rifle as loaded and use respect and proper muzzle control..AT ALL TIMES....
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|