Lefty you just beat me to it :-)
Quick check to see where your at..
I have mine set at .800 or about 13/16" for my Triax
Check for plaining angle from center shot to the riser side
Tape an arrow to the riser's side just above the burger hole
nock another arrow on rest
If your arrow on the rest "plains" to either the left or right a lot compared to
the other arrow taped on the riser, you may need to go to a bow shop to
get it yoke tuned or cams shimmed.
There used to be a post on here by Lost Arrow here on yoke tuning, if you
don't have the tools bow press etc. Best to take it to a bow shop.
Hope this helps.