View Single Post
  #3  
Old 09-29-2019, 07:42 PM
warriorboy10 warriorboy10 is offline
 
Join Date: Jun 2007
Posts: 1,047
Default

Quote:
Originally Posted by ctd View Post
If it's a bolt action. Go to the range.
Pull the bolt out of the gun. Look down the barrel from the breech end.and center it on a target at 50 or 100meters/yards. (The further away the better).
Then adjust your scope so it lines up with the center of the target. This should put you on paper.

Note use a sand bag/gun rest, bipod etc to hold the firearm up right. If you need to block the butt up use a box or two of bullets, or any other material under the but so it will hold steady lining the bore up to the target
It works really well, you will be o paper and can buy a box or two of bullets for the cost of the bore scope
X2. No need whatsoever for a bore sight tool.
Reply With Quote