Quote:
Originally Posted by Big Grey Wolf
In BC just need to doz logs/brush off the rock then drive on it. In Alberta, need to dig 4 feet of muskeg out, then haul good clay for about half mile from borrow pit, pack it to 90 proctor and finally spred some gravel.
By one of my trapping cabins oil company rebuilt same road 4 times before it would keep loads of gravel from being pounded into bottom of road.
|
90% of proctor density... don’t think so. Minimum 95 and top 300mm is at 100% SPDD.....sorry couldn’t help myself on AT specs . Happy Easter