Quote:
Originally Posted by Xbolt7mm
Kinda broke my heart as I wrecked about 4 brass because I didn’t set the die off the shell holder at full stroke. It was trying to crimp it as I was still shove the bullet in the case, Then,,,,I read the instructions lol
|
If you want a consistent quality crimp without risking your cases, get a Lee Factory Crimp die and do it as a separate (last step). A little more work but worth it in my opinion. Also make sure your cases are all the same length if you're using the seating die to crimp. Different lengths can play havoc with the process.