View Single Post
  #8  
Old 08-15-2018, 10:04 AM
fast_pass88's Avatar
fast_pass88 fast_pass88 is offline
 
Join Date: Apr 2011
Posts: 314
Default

Thanks for all the input guys, I'll check all of these things tonight. It's possible the seating die is out of adjustment.

It shouldn't be an issue with the full length sizing die, as my cases that do not have bullets installed don't have the bulge, it's definitely only happening when I seat the bullets. I'm using redding dies. It wasn't a random thing either, all 20 rounds I loaded have done the same thing.

The bad part is I guess I'll have to pull all these bullets and resize the brass, as I'm sure they wont be accurate. Does anyone know if I can remove un-spent primers with my Lee decapping die?

edit - cases are trimmed to length, I'll double check my trimmed length is within spec tonight. Case mouths are also done with a VLD chamfer tool

Last edited by fast_pass88; 08-15-2018 at 10:30 AM.
Reply With Quote