Quote:
Originally Posted by Redneck 7
I like composite decks better when the boards are picture framed. I have done strait decking before and used the end caps. Don’t mind the look but picture framing is way cleaner
|
This is how I did mine. I did the picture frame on the perimeter, then ran the boards inside the frame. Saved the edging procedure. I put the picture frame 2 inches over the edge of the deck, then ran a composite board on the face of the deck so I only had a 1 inch overhang. I glued the face board to the deck face and tacked it in with a few coloured screws.
BW