Quote:
Originally Posted by Hogie135
I'm not close to a shop. I can sort it out on my own just need some pointers on where to look.
|
Look up yoke tuning on archery talk. There is tons of info there. You will have to put your rest back to the middle though, usually ends up 13/16" or there abouts. After that you twist one yoke (in this case I would try the right first) and un-twist the other the same amount and see what effect It has on the tear. This is the way all hoyts should be paper tuned imo. There shouldn't be a need to move the rest from center.you can even walk back yoke tune if you want, although if you bare shaft yoke tune from the get go there is not a need for anything else.
Jmo,
Norm
Sent from my SM-G935W8 using Tapatalk