Quote:
Originally Posted by Dean2
Okay, I'll bite, how did you change the parallax.
|
Find a target that is 50 yards away, or what ever distance you want it set to, remove the bell end piece, mine is about 1/2 thick. It’s hard to get off. That cap actually screws onto the objective lens mount that will screw in and out once the cap is off.. look through the scope at the target and move your head from side to side and the target will move on the cross hairs. I screwed the objective out 1/8 of a turn at a time until the target no longer moved when I moved my eye from side to side, about one full turn out. Make sure you dont go out to far as the objective mount has the o ring that holds the gas in., there thats all. Move it back in the full turn to put it back to 100 yards. Most of the name brands work like this except Burris, basically any of them with a ring on the end of the bell. Disclaimer,,,,this worked for me, enter at your own risk