Quote:
Originally Posted by skidderman
Anyone have one? Thoughts. Looking for something different than the norm likely in 7mm. To me the 7mm is OK but been there done that. Trying to figure out what might motivate me to do a build or do something different.
|
A 7mm PRC would be an interesting project. With the 180 erger Hybrid seated as shown it would hold virtually the same amount of powder as a 7mm SAUM with the bullet seated to 2.95" OAL. It would work great in an action designed for a 3.6" belted Magnum cartridge but the belt would be eliminated. The RL 26 data is estimated but actual data from a 7mm SAUM with a 26" barrel mounted on a Defiance Ultra lite Action.
[IMG]
[/IMG]
These 6.5 PRC Hornady Match Grade bushing dies are available at X-Reload and would work with the proper bushing.
https://x-reload.com/hornady-6-5-prc...2-die-set.html
6.5 PRC brass is also available at X-Reload.
https://x-reload.com/hornady-brass-6...med-50-bx.html