Making a Long Bow
Hey!
Attempting to make my first Long Bow. I have been watching lots of videos and reading diy articles.
I cut a large Saskatoon, 3-4” diameter bottom to 2-3” top at 76”. I removed bark and split, leaving me a straight back and rounded belly. I cleaned out the knots, and have a surprisingly straight grained stave, about 1-2” thick. I Wrapped ends with cello and clamped it between 2 straight boards and will let dry.
Now I think I should have just sealed the ends and left bark on, is it futile to continue with this piece, should I start again?
Any and all opinions welcome!
|