View Single Post
  #14  
Old 08-16-2018, 06:55 AM
elkhunter11 elkhunter11 is online now
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,842
Default

Setting up the seating die incorrectly is actually more common than I would expect. My method is to place a sized case in the press, drop the handle down, with no die in place, then screw the seating die down until it contacts the case, and then back it off 1/2 turn. And although it seems obvious to me, some people do not readjust the die when using a different press, such as when borrowing a set of dies from a friend to use in your press.
__________________
Only accurate guns are interesting.
Reply With Quote