Quote:
Originally Posted by psale63
Thanks 6.5 shooter, I'm thinking I'll stick with this same method. I currently have my trimmer mounted to a scrap section of 2x4 that I would c-clamp to a bench. I'll probably change that out for a fancy piece of scrap 3/4" hardboard or 1x4 I've got lying around to give a low profile look!
|
I use the rcbs accessory base plate, works good if all your reloading equipment is rcbs.
https://www.rcbs.com/accessories/rel...3/16-9282.html
Sent from my iPhone using Tapatalk