Working on a roll up tarp to cover the front, have a piece of 2 3/8" OD pvc pipe
and the tarp to use at the top. Want to make it work like a window shade, hand crank on the side of the building to roll it up.
Figure I can hang the pipe in the front eve by 2 sets of muffler clamps attached
to a wooden frame on each side of the building then drill a hole through the siding to insert the crank.
A length of 1" dia. pipe attached to the bottom of tarp will act as ballast and
provide a way to secure the bottom edge of the tarp when closed.
Any suggestions to a better way would be greatly app. :-)
Also getting ready to route out yardage markers at 5 yard spacing, using cedar boards about 4"x5" like you see yardage markers on a golf course. :-)
Need some help with lighting suggestions as well, any thoughts on that would
be greatly appreciated.
|