I Use Imperial sizing wax on the case body, and their graphite lube on the necks and resize and decap, using whichever die I prefer for that usage. With my big game loads, I use neck bushing FL dies, and with my target loads, a neck bushing die. I check overall length and trim and chamfer if anywhere near the maximum length. I use the RCBS Universal Priming tool to prime, and since I use a Chargemaster to pour powder charges, I seat a bullet immediately after pouring a powder charge, while the next powder charge is metered. I anneal cases after a few loadings, and wet tumble in stainless pins, after annealing.
__________________
Only accurate guns are interesting.
|