View Single Post
  #159  
Old 10-21-2013, 09:44 PM
Rdamours Rdamours is offline
 
Join Date: Nov 2012
Location: St Albert
Posts: 809
Default

Oh yeah. .308 and 223 could have been through a semi. I didn't separate my cases and you can really tell the difference during sizing.

Quote:
Originally Posted by a little redneck View Post
Just finished reloading the brass I bought from the gun show. Here is what I learned, if brass has been fired but not in your rifle it needs to be full length sized. I reloaded 6 rounds with neck sized brass (used) and I could not get a single round of the six in the chamber of my rifle. I forced the bolt closed and had a heck of a time getting the round out of the chamber. I pulled the bullets and full length re-sized the brass then reloaded and vola they chamber in my rifle.

I didn't want to spend time de-priming and re-priming so I was pretty careful not to push the live primer out. (had to resize 40 cases).... probably not the smartest thing to do.... but couldn't be discharging primers in the city.

Lesson learned.... full length resize in doubt.
Reply With Quote