Yes, SPFGA. The frame is made from 1/8" X 1" flat bar. 1/4" clear plexi is secured with silicone. Frames need to be painted with high visibility color as without, it is darned hard to see. Total weight is about 10 lbs so pretty maneagable to move between positions.
In the second picture you can see a towel I draped over the plexi so I could use it as a brass catcher for that M1 carbine. If we decide to multi-purpose them, it will be easy to cover the top half of the plexi with the same type of mesh we use for brass blockers which would add less than a pound to the unit.
|