Thanks for the thoughts everyone ..... pretty much mirrors common logic on this subject.
I am thinking, as it's an old Remington, with a wood stock, over the years it's shrunk and I can feel the action/barrel moving if I press down on the action/barrel above the recoil lug - so I was thinking a bedding job would firmly seat the action nicely.
If the bolts snug down securely - I'm just debating in my head if adding pillars is worth it or not in this case or would a simple bed job be enough.
Keep in mind this is a $600 gun and I'm looking for simply MOA (or close to MOA) performance - not a tack driver or LR rifle.
This rifle will be the bush gun used in areas where shots will be 50-150 yards.
|