As I mentioned earlier I did a modification to the engine to provide additional cooling to the stator, as this is a problem with the 2007 & 2008 Grizzly 700's.
I also subscribe to the "Grizzly Forum" and it is may be a better venue for this information. So I did post it there. Has lots of pictures and the procedure to do the mod if you are lucky enough to have the right case casting, (as I did). It only cost me $27 to do this for the parts.
I hope it is OK to post a link to the information, it was easier to post pictures there than here.
https://www.grizzlycentral.com/threa.../#post-1112225