Quote:
Originally Posted by -JR-
I went threw the same think last year on my lund boat .Front seats are just about 3 inches to low . Very hard to find that diameter pipe . So i ended up placing a spacer between the seat and the upper seat base . First i used some 2 x4 but 2 inch was still to low so i installed longer bolts and four 1/4 x 3 inch pipe nipples .
I hope that helps
|
I was thinking of nipples as well. I might check down at Windsor's off cut bin, might be able to find some really hard wood that I could use for cheap. Just make pillars out of the wood. I was thinking nipples might not have enough bearing surface, a piece of wood I could make a 1 or 1 1/4 square 3" long and drill through it.
__________________
“One of the sad signs of our times is that we have demonized those who produce, subsidized those who refuse to produce, and canonized those who complain.”
Thomas Sowell
|