[catnthehat]

I use Lee lube. I put about 30 cases in a large margarine tub and put about an inch of lube on my finger, I spread this along the inside of the tbe.
Lid goes on and I share the tub for about 20 or 30 seconds .
After the cases are sized I wipe them down with a rag with G96, and dry brush the inside of the necks with a brush on my Casemaster .
I have never had an issue with powder sticking in the necks using this method.
At one time I lubed the necks separately, sized them, then cleaned them with Hoppes, then a patch.
Never an issue with sticking power using that method either.
Cat