Quote:
Originally Posted by mtnhunter
Hi all,
It’s a 270WSM. Cartridges were all previously fired by the same gun. Did full length resizing and bullets are all seated to the same depth. Some cartridges fit well and I can close the bolt normally, others I can’t close the bolt. Thoughts?
Sent from my iPhone using Tapatalk
|
You have been given things to check, overall length, do the cases need to be trimmed because the necks on some are too long, easiest and common fix. If that isn't it, mark up the case with a sharpie and see if you can tell exactly where on the case you are binding up. At the tight spot, the sharpie should be removed or scuffed up. Once you know exactly what is binding easier to decide the fix. Let us know.