My experience is all with R&R of a scope off the same gun, off a dovetail type rail with regular Ruger or Burris rings at the range, it works, works well, Used to have to swap from scope to irons and back and forth. One was a modified Ruger base off a #1 and the other was on a dovetail built onto the barrel.
The other setup I've used is a Recknagel swivel mount setup, and also, claw mounts. They both work well. Lot of Euros use a rail mount that is built on to the scope.
Lots of ways to do it, they all work, swapping guns is a bit trickier in readjusting the scope, but, it certainly will work as long as you retain the settings for each gun.
__________________
You should also be a member;
CCFR
CSSA
|