Strikemaster 40V Power Auger blade screws
 

Folks,

The blade ran off the StrikeMaster 40V power auger.

Does anyone know where I could find the screws / bolts for auger blades?

Thx!

if you buy new set of blades screw will come with it . you will need 8mm wrench to put them on. socket wont work.

Fishn Hole carries the Strikemaster Blades. Not cheap 8" is just over $80

And as said you need a 8mm wrench socket won't work

I would be checking the bolt house and other specialty bolt suppliers before I paid 80 bucks just to get a couple of screws.

Yeah, that's what I was thinking. No sure where the the OP is from but in Calgary The Bolt Supply House or Calgary Fastener are 2 places I would check. Then make sure it is tightened properly and maybe some locktight.

Thank you all.

The blades are still in great shape. Just need screws.

Will check The bolt supply house and Calgary Fastener!

Tight line!

Interesting. I've never had a set come loose. I keep an 8mm wrench in the zip pouch on my rod holder bag and a few times a season check the bolts to ensure they are snug. I also check the auger bolt each outing to ensure the flyte connection is solid. Never had it happen to me but I've seen a few flytes head for the bottom of the lake over the years!

Perhaps a magnet fishing setup is a good idea in the kit from now on.