Alberta Outdoorsmen Forum

Alberta Outdoorsmen Forum (http://www.outdoorsmenforum.ca/index.php)
-   Guns & Ammo Discussion (http://www.outdoorsmenforum.ca/forumdisplay.php?f=6)
-   -   308 win to 6.5 Creedmoor (http://www.outdoorsmenforum.ca/showthread.php?t=378926)

trooper 04-01-2020 05:38 AM

308 win to 6.5 Creedmoor
 
I’m just mulling around an idea. I have two .308 rifles and I’m wondering how difficult would it be to convert a savage .308 to a 6.5 creedmoor?
One is a Savage M10 TR and the other is a savage scout in .308 as well. If this is feasible, which one would you convert?



I just realized that this post should be in the Guns and ammo discussion.., sorry.

Scottmisfits 04-01-2020 07:07 AM

I don't know much about either rifle but being as they re both Savage's, it would be fairly easy to change if out. Get the barrel with the Savge threads, a set of go/no go gauges that your favorite gunsmith with have and thread it on.do it to whichever one you like. If you decide you don't like the particular cartridge on the one, you can always put it on the other. Savage makes this pretty simple with their barrel system.

catnthehat 04-01-2020 07:51 AM

Quote:

Originally Posted by trooper (Post 4139073)
I’m just mulling around an idea. I have two .308 rifles and I’m wondering how difficult would it be to convert a savage .308 to a 6.5 creedmoor?
One is a Savage M10 TR and the other is a savage scout in .308 as well. If this is feasible, which one would you convert?



I just realized that this post should be in the Guns and ammo discussion.., sorry.

Takes no more than s few minutes , that is all it took for me to spin on barrel off an install the new barrel .:)
Order a Pre- fit McGowan barrel from Jerry at Mystic Precision, head space gauges and the wrench and you are set :sHa_shakeshout:
Cat

NicoyaHunt 04-03-2020 03:28 PM

Just get a new Savage barrel chamber in 6.5, U can do it or any gun smith

Roamer 04-04-2020 03:20 PM

As other have said, it’s pretty easy once you have the right equipment.

Of the two guns you have as potential donors, I would say it comes down to this:
1. Which of the two do you use more?
2. What would you use the 6.5 for?
3. For the savage you leave a 308, what would you use it for?

Seems to me the scout is likely better suited for hunting (lighter). The 10TR would be better suited for target shooting (heavier barrel).

If you do go forward with the swap and don’t have plans for whichever 308 barrel you remove, send me a pm, I might be interested in your take off 308 barrel.

trooper 04-16-2020 02:48 PM

Thanks fellas, I think I'm going to keep the Savage M10 TR as I've been very lucky hunting with this rifle. The savage scout, I'm going to sell at some point as it's more than what I need.

Prairiekid 04-16-2020 08:13 PM

I assume this could be done with any Tikka or Sako as well? If you found a prefit barrel it should be a easy swap from .308 - 6.5CM.

catnthehat 04-16-2020 08:30 PM

Quote:

Originally Posted by Prairiekid (Post 4151571)
I assume this could be done with any Tikka or Sako as well? If you found a prefit barrel it should be a easy swap from .308 - 6.5CM.

Not nearly as easily as a Savage because of their barrel nut
Cat


All times are GMT -6. The time now is 08:02 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.