![]() |
Gun Vice Advice
I'm looking to see what people are using for their gun vices. It's time to get one and I'm wondering if the $40 option at Cabelas will work or if there are things to consider when buying one. Thanks in advance for the support.
|
If all you want is something to facilitate cleaning, an MTM, red plastic job works just fine. If you want to work on guns, then the higher cost versions like the tipton are worth the price.
https://i5.walmartimages.com/asr/f8c...2&odnBg=FFFFFF https://www.sail.ca/media/catalog/pr...idth=&canvas=: |
I have the Tiptons best vise. It works but it doesn't clamp tight on the stock. Being plastic, the more I tighten it, the more it spreads apart. Which is annoying when mounting scopes. It let's the rifle move around a bit. That's my only issue with it.
Sent from my SM-G970W using Tapatalk |
Dean beat me to it. The lower one pictured is the one I have.
Sent from my SM-G970W using Tapatalk |
Use a bench vice.
|
For most stuff I can use the Tipton love installing sights, scorching bores or mounting scopes etc., but sometimes I use my bench vice if I have to use a lot of torque .
Cat |
Have the Tipton. Doesn't clamp super tight but also haven't had any problems with it so ya. Also have a bench vice.
|
I have a Tipton and a good quality ( not Chinese) bench vise. For the most part the Tipton gets minimal use. If u want a self contained unit the Tipton is the one
|
For heavier work on stocks etc I use a vise where the head and base are infinitely adustable and rotate left, right, on any angle and the head rotatesw as well..
https://m.media-amazon.com/images/I/...AC_SL1500_.jpg With the cork padded add on aluminum jaws it holds wood with no marking. Works great for carving and rasp work etc on gun stocks. https://m.media-amazon.com/images/I/...AC_SL1500_.jpg |
Quote:
|
Quote:
|
I have a wood gun vice I made years ago off a pic I found on the internet. I mostly use a bench vice that has all the swivel options. I made a set of jaw blocks out of wood that I cut a triangular notch into so it will clamp on a barrel. It works great
|
Quote:
Mines never failed to hold my rifles firmly with all variety of stock configurations. Not sure what guys are doing to create enough torque that they won't hold. I use mine for cleaning and scope mounting. CZ .22's can be tight buggers to run a cleaning rod through with a standard .22 brush or jag but thats a no no anyways. |
Quote:
Cat Cat |
Thanks for the advice!
|
This is the type I built for cleaning. Works great for cleaning type jobshttps://uploads.tapatalk-cdn.com/202...8c18a48897.jpg
Sent from my SM-G950W using Tapatalk |
If you go Tipton at Cabela's, wait for them to go on sale... I got the Tipton Best Gun Vice about a year ago for $79.99... They're typically $179.99... Not sure how they can charge so much for a Tupperware men's toy? As it was, I paid too much for that mediocre engineered plastic gun clamp.... :) If I were to do it again, I'd construct my own... :)
|
I just use a large, ancient, swivel-base Craftsman bench vise that is mounted on an open corner of my workshop countertop. I cut some wooden vise jaw inserts out of plywood that I further pad with a folded up green wool Leupold scope "mat" that used to come with new scopes. Doesn't damage the stock, steel components or bows when I clamp them to work on them. Even built some offset wood blocks to get things further away from the countertop when necessary. Rarely a day goes by that the vise doesn't serve as the stable third hand for some cleaning, repair or fabrication job.
|
I have one of these, although mine has been modified a bit. I see they are now discontinued, but Hyskore does have some other models.
[IMG]https://i.imgur.com/BuB0WmBl.jpg[/IMG] |
Not sure what shipping charges are like: https://northprosports.com/index.php...roduct_id=6091
https://i.postimg.cc/Ls5kpGC9/B3-DFE...63-A60-EBE.jpg |
Quote:
|
All times are GMT -6. The time now is 02:05 PM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.